Vacuum diagram

[Lawrence0485]

Hey guys when I bought my 86 k10, the previous owner had removed the ac compressor and condensor. I'm guessing that in the the process, he had to unhook a lot of the vacuum hoses. I'd like to get them hooked back up but my diagram has been removed and replaced with a crane cams sticker So can anyone point me the right direction?

 

[British Slave]

Only one vacuum hose for AC. It runs from the manifold behind the carb, to a tee on the firewall. One side of the tee goes to the round vacuum reservoir beside the brake booster and the other goes thru the firewall beside the AC/Heater box on the pass side.

 

[K85 Octane]

Or are you looking for all the vacuum lines? I'll try to snap a picture of my core support diagram

 

[Lawrence0485]

Or are you looking for all the vacuum lines? I'll try to snap a picture of my core support diagram

That would be great!! Ive got a handfull of hoses up by the steering box that are just stuffed into the inner fender...

 

[K85 Octane]

I have all the emission crap and computer controlled carb, so I'm not sure how much this is going to help. Lets see....

 

[Lawrence0485]

Thanks a lot this looks like what I need.

 

[K85 Octane]

Unless you really need all that stuff for smog reasons, I wouldn't bother with the hassle. Pull everything off and store it in a box (in case smog becomes an issue) All you really need is vacuum to the distributor, brakes, and AC

 

[Lawrence0485]

Ya im really just trying to get my heater controls to work. If I don't need all of that mess then its coming off. Do I need the canister by the steering box?

 

[K85 Octane]

that's the carbon canister, if your gas tank vents into it, yes, it works great for that and should be kept. I only run one line into it, my tank vent, all others are missing.