XtrmChevy
1/2 ton status
I have not seen meny but the ones I have seen had 4,10 including the one under my truck.
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Van Axle ????
- Thread starter SkulzNBonz
- Start date
BigOrange90Jimmy
1/2 ton status
My van 14b has a 3.75 ratio in it. 45 ring, 12 pinion. I hear that's what they used in them. But it's still close enough to 3.73 that it wouldn't hurt it to drive on the highway if locked in 4.
</font><blockquote><font class="small">In reply to:</font><hr />
There's two different backing plates for the 13" drums. Offset backing plates are for the 3.5" wide drums. Flatter ones for the 2.5" drums. 11" and 13" drums were both used on 3/4-tons.
[/ QUOTE ]
I stand corrected. Thanks! /forums/images/graemlins/thumb.gif
</font><blockquote><font class="small">In reply to:</font><hr />
One thing about me is if I dont KNOW for fact, I make sure I say so, so noone will try something I said and think its gonna work. Sometimes Ill make a post like above, (this is what I have heard type thing) to find out for positive myself and hopefully help someone else.
[/ QUOTE ]
That's the only way to be, brother. I don't know everything, as you can see from this thread. Luckily u2slow corrected me before I told someone else that.
</font><blockquote><font class="small">In reply to:</font><hr />
There's two different backing plates for the 13" drums. Offset backing plates are for the 3.5" wide drums. Flatter ones for the 2.5" drums. 11" and 13" drums were both used on 3/4-tons.
[/ QUOTE ]
I stand corrected. Thanks! /forums/images/graemlins/thumb.gif
</font><blockquote><font class="small">In reply to:</font><hr />
One thing about me is if I dont KNOW for fact, I make sure I say so, so noone will try something I said and think its gonna work. Sometimes Ill make a post like above, (this is what I have heard type thing) to find out for positive myself and hopefully help someone else.
[/ QUOTE ]
That's the only way to be, brother. I don't know everything, as you can see from this thread. Luckily u2slow corrected me before I told someone else that.
