smprider112
1/2 ton status
where exactly are all the VIN numbers on an early 70's blazer located at?? /forums/images/graemlins/dunno.gif
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
VIN numbers
- Thread starter smprider112
- Start date
84gmcjimmy
1 ton status
Glovebox, inside engine bay, etc.
Muddytazz
1 ton status
Depends on how early your talking about. On my 75 there is 1 on the b pillar, 1 on the dash and 1 on the frame. I think on the older ones (older than 75 at least) there wasn't 1 on the dash but still on the frame and b pillar.
smprider112
1/2 ton status
where abouts on the frame? I couldnt find it....and isnt there supposed to be one in the engine bay?
84gmcjimmy
1 ton status
I had one in my engine bay of my Jimmy.
Muddytazz
1 ton status
On the frame its going to be on the top of the frame rail. Where its going to be /forums/images/graemlins/dunno.gif GM put them on all over the place from what I've seen, but typically its on the top side of the frame rail in the engine compartment somewhere.
55Willy
3/4 ton status
my 77 blazer was dash, b piller and the frame was stamped on the passangerside by the transfer case (outside of frame) and on the body mount crossmember behind the transfercase on the top.
The first generation K5's I had put the numbers on the sticker on the glove box door,and on the drivers side door jamb,near the striker bolt,a metal tag is riveted on there.I have seen the sticker that is usually on the glove box located on the drivers side inner fenderwell under the hood too.The frame has numbers too,on the passenger side rail about halfway back--none of mine matched the vin--and supposedly the trucks were unmolested originals--never figured that out! /forums/images/graemlins/dunno.gif/forums/images/graemlins/crazy.gif
