CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.

Wanted: 76' to ?? K5 doors non power

rdn2blazer

1 ton status
- In Memoriam -
GMOTM Winner
Joined
Jun 9, 2004
Posts
21,234
Reaction score
6,768
Location
So Cal.
Not sure what year doors fit on a 73', all I assume. I Want full 76' and later doors. NOT LOOKING FOR CONVERTABLE DOORS. Decent shape preferably. Can pickup locally. cheaply priced preferably too please.
 
Last edited:
For a full vert you are looking for 73 to 75 but 76 to 91 doors should bolt up to you just need to do some window frame mods.
 
For a full vert you are looking for 73 to 75 but 76 to 91 doors should bolt up to you just need to do some window frame mods.



Don't want full vert doors, already have them. I want full doors for my full vert. Makes a custom soft top easier to mount round the doors. To difficult to explain, but yes I want full doors for my 73'.
 
Oh hell, Rob, I forgot all about this. I've got truck and burb doors that should fit, both manual and power. The power doors are in nicer shape, but we can play mix and match to put the manual regs in them if you want. We can make it happen for cheap. Just give me a call. I'm on 2nd shift, so not too early please.:D
 
Last edited:
Here's a couple pics of the '79 set I PM'd you about, but I found a crack in the DS doorjamb.:doah: They're not as straight as I thought they were, but I have others that are better. It's just that the others are power, so they'd have to be swapped over.

100_7156.JPG

100_7159.JPG

100_7160.JPG

100_7161.JPG
 
Thanks for posting the pics Chris. Another member with a set of 76' K5 doors contacted me when I first posted this thread, I could not get them at the time. He saw this thread was pulled back up and contacted me again, going to look at them this weekend. Nows a little better money situation. He's in Long Beach which is close for me. If I pass on his I will come out for your doors. I can weld the crack up and they don't have to be perfectly straight, just preferably no rust or very very little. Thanks man.
 
Top Bottom