73redblaze
1/2 ton status
Hey guys, I broke both caps off my Warn hubs and i was wondering if i could buy just the caps somwhere or from someone? Thanks for the help
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
warn hub caps
- Thread starter 73redblaze
- Start date
chulisohombre
1/2 ton status
buying just the caps would probly cost you almost as much as buying new ones.i found that out when i broke my side gears on my detroit.brand new one was 450 or 350 for the side gears to fix it.you may have to buy new ones.standard ones are only 85 bucks.check ebay.maybe something on there for cheaper.here is the link to the hub parts.not sure witch ones you have. http://www.warn.com/truck/hubs/hub_service_parts.shtml
Phreeeow! Chulisoman's right; Summit gets like $65 for an example set of caps. Guess it's time for new hubs and keep the old ones as parts spares. 
-- A
-- A
7387chevynut
Registered Member
Last I knew...............WARN hubs came with a LIFE TIME WARRANTY...........I bought a set from NAPA back in 1998.........with in 3 years several of cheap aluminum bolts that held the covers on broke...........brought the complete hubs in..........and they gave me a brand new set.
That is true, I just bought a set and the box said it
73redblaze
1/2 ton status
DAMN! i threw them away last week! I still have all the internals but tossed the hubs.
73redblaze
1/2 ton status
I think I have a couple of the WARN regulars I could sell you the dials from, but no Premiums.now i know
Which one do you have?
73redblaze
1/2 ton status
just the reg ones as far as i know, they were pained over all you could read was WARN so i dont think they were premiums. quick question while we are on the subject, can you use the warn locking hubs off a DRW on SRW hubs?
std warn = black plastic dials unless ford red plastic.
prem warn = brass dial .
and srw or drw use same hubs.
prem warn = brass dial .
and srw or drw use same hubs.
Crap, I forgot you have a D60 now, mine are half ton hubs.
Well, yes you can use any D60 locking hub, they are the same wether dually or single.
owenst7
1/2 ton status
Pretty sure Ford Dana 50 hubs are the same thing too aren't they? Just in case you have a good junkyard nearby.
I've got a set of WARNs you could have for the ride, but they're for a 44
I've got a set of WARNs you could have for the ride, but they're for a 44
73redblaze
1/2 ton status
they were brass not plastic, thanks for the help
