Warn hub help

[beto101]

Im needing help replacing my warn locking hubs on my k5. Ive looked around and everythin gb ive read doesnt say where the big spring goes. Mine broke so I cant lay out parts as I pull them out. Anyone out there that can explain how to reinstall the locking hubs?

 

[Muddytazz]

IIRC the big spring goes between the stub shaft and the ring gear. Worst case pull the other side apart and have a look at that side to tell ya.

 

[Roadhazardguy]

Worst case pull the other side apart and have a look at that side to tell ya.

Unless you have both sides apart.

 

[Fordum]

Unless you have both sides apart.

In which case, you just grab your tools, and drive around town taking them apart as you find them until you figure it out........

 

[Blue85]

There is also a smaller spring inside the cap of the hub, but you won't get to that one unless you pry off the "Warn" logo on the selector and remove the screw there. Sorry I can't find a picture of the other design with the "hole" washer and jam-nut.