Grey Goose
Registered Member
Im putting a chevy 305 in my 84' S-10 Blazer..anyone have a clue on what headers would fit "nicely" in this situation..
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
What headers should i use...
- Thread starter Grey Goose
- Start date
I believe you can find headers for this conversion at www.advanceadapters.com
I don't know if that's the best place to get them, but the only one I can think of off the top of my head.
I don't know if that's the best place to get them, but the only one I can think of off the top of my head.
Desert Rat
Fetch the comfy chair
If you can fit them, I'd go with Doug's Headers (Doug Thorley) http://www.dougsheaders.com/
Slapperbar
Retired Navy NDT Examiner
Headmans SUCK! I have some on my V8 S-10.
big83chevy4x4
3/4 ton status
when i did my v8 s10 swap, i used these
http://s10v8.carshopinc.com/product_info.php/products_id/59247/S104WDHD
had to dent one tube on the pass side to clear the shock tower, but not much at all. other than that they fit great.
good luck with the rearmost passenger side header bolt if you have AC, took us about 10 minutes to get that one bolt in.
http://s10v8.carshopinc.com/product_info.php/products_id/59247/S104WDHD
had to dent one tube on the pass side to clear the shock tower, but not much at all. other than that they fit great.
good luck with the rearmost passenger side header bolt if you have AC, took us about 10 minutes to get that one bolt in.
