Wheel Bearing Stuck

[scotto0609]

So I seemed to have welded my outer wheel bearing to my spindle yesterday. I got all the hardware off just cant seem to get the wheel bearing off. I spent most of the day, tried heat,kroil, banging,dropping truck onto wood block,tried leverage with tire. I thought if I could get the rollers out I could make it work but no dice. Started to drill and chisel but before I booger it up I thought I would ask. Might go get the cutting torch from work what is the consensus? Thank Scott

It sucks because I had the truck sold!

 

[K85 Octane]

It sucks because I had the truck sold!

That cuts deeeeep! Sorry man. Never had this problem but subscribing for an answer.

 

[shady]

put the wheel back on let it off the jack and pull forward something will break free gonna have to replace the spindle anyway

 

[kennyw]

Use a BFH with a chisel to split the inner race in half. Then replace the spindle and bearings.

 

[TheBeast_88K5]

^ that.

 

[scotto0609]

Took the easy way out and sold it! Lazy I know but didnt need the hassle and took the hit!

 

[TheBeast_88K5]

Has bad bearing... Sells whole rig!?

Ohh.... I see.
You were selling it to begin with.

Tell me that wasn't a $500 bearing...