wheels (again)

[MTChevy]

Okay, I totally mutilated that last post. Here is what I am at. I am looking at these wheels. http://store.summitracing.com/partd...sku&Ns=P_SRE_DisplayPrice|0&Ntk=KeywordSearch

I want to put a 33x12.50 on them and not care too much about scrathing them but having a wheel that looks nice. My main question is what backspacing would i want. There is 3 3/4 or 4 3/4,,, That gives +6mm offset and a -19 mm. What would you suggest? Thanks for putting up with this! But i think this post makes more sense!

Cole

 

[sweetk30]

33x12.50 on 8" rim kind of tight. best look and wear on tire with 10" rim

 

[sled_dog]

but best bead retention is 8"

 

[MTChevy]

hmmmm. They will be aired down at times

 

[mikey_d05]

how far?

 

[MTChevy]

not far, unless i get a flat then they will be really aired down! cause i dont wanna screw something up. this is a DD that sees offroad once in a while, mud and easy trails.

 

[mikey_d05]

I don't think 10's would be a problem.

 

[MTChevy]

What backspacing if i was to get this model in a 10 inch wide?

 

[MTChevy]

I also dont want a tire that is extremly wide i guess, the 10.50's now seem kind of skinny

 

[project84k5]

i agree, i had problems blowin beads with 35.1250 on 15x10 and when i got the one tons under it i had 16x8 with 35.1250 and never had a single problem, so i would go with 8s, just my 2 cents......

ryan

 

[MTChevy]

ok i decided im getting the 8 inch wide... what about backspaciing though???