What's new
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.

Wife wants to know

2 sets 10bolt spare axleshafts
1 set 4" Tough country EZ ride front springs
1 set of SBC heads from a 60's 283
TPI system
700R4/208 adapter w/crossmember
front driveshafts in pieces
2 BFG 35" at's
5 BFG 32" at's
1 BFG 33" mt
5 15x8" 8 lug wheels
and a bunch of other spare parts and BS stuff
 
14 bolt ff and 8 leg Dana 44, pair of rear leaf springs and ORD shackle flip, pair of 36" Ground Hawgs. Still need to get a couple more tires and the rims, then I'll begin working on mine.
 
being 17 i think i have already started a pretty good stock out at my dads.

4 78-83 duallies
4 14BFF (DRW)
3 D60 (drw)
2 SM456/205
1 TH400
4 running 454s
1 BONE STOCK NO RUST PERFECT K5 10b front and rear 350/700r4 rebuilding 350 at the moment /forums/images/graemlins/cool.gif )
 
Just a partial list
1973 k-10 frame(stripped bare)
12 polt 3.08 posi from same truck
2 TH350 4x4 trannys(needing rebulids)
1 TH350 shorttail car tranny(no forward gears)
1 500 cid 1976 Caddy motor(ran good 5 years ago,hope it still does!)
1 203 transfer case(I put a 205 in my 74 K20)
1 81 van rear end,10 bolt with worn diff.case 3.08
1 TH350 MV4 tranny(spare for my 81 G10 van
3 snowblowers
2 riding mowers
misc.homemade buggies and tractors
tons of small stuff in the 20x 40 quonset hut garage
aproximately 50 mower and golf cart tires and rims
25 bias ply tires and rims(anyone need trailer tires)
thats only a partial list--worst part is my mother owns the land not me--in the process of removing a lot of it to the scrapyard. /forums/images/graemlins/frown.gif /forums/images/graemlins/frown.gif
 
10 bolt housing-1
6 lug 10 bolt shafts-2
12 bolt housing-1
5 lug 12 bolt shafts-2
3.73 12 bolt R/P-1
379010 .03 over 350 block-1
1.84 valve heads-2
carb spacer-1
HEI distributors-2
Vette Master Cylinder-1
Alternators-3
Starters-2

most of this stuff is in a storage unit across town..but the axles and shafts are in the back of my truck and the block and some misc stuff is in the garage, theres more, cant remember it all though..
 
Hey Tony....t-bird calipers with e-brake. Care to explain this set up at all? Sounds intersting/forums/images/graemlins/thumb.gif
And by the way...you do some NICE work/forums/images/graemlins/thumb.gif /forums/images/graemlins/cool.gif
 
HAH!!! My wife doesn't even ask anymore!
The list is endless! I have 3 blazers and her S10 all in the driveway, The garage is full, the cellar is 1/2 full and the shed behind the garage is full, and I have another parts truck, which is at a friends house because "I can't bring anymore home" !!! (that she knows of!)
 
Mike, were in so cal are you, if your close to me come over and check them out...are you going to the so cal big dawg meeting this weekend?
 
Lol, I forgot, I've got more crap. 3 leaky radiators, two three cores and one two core. One NP 208 for 700R4, dirty but functional. flexplates for 1 and 2 piece RMS, flywheel for 2 piece RMS, four 35" BFG A/Ts nearly bald, no less than three sets of stock sized 16 and 16.5 rim 8 lug tires, batteries, rims, just too much crap. I have a spare set of brand new 1/2-3/4 ton stub shafts and a spare used stub and long side shaft and u joint for a 10 bolt front.

Oh yeah and an extra Echobit flip because I bought one of the prototype lifts and Mike sent me two passenger side brackets, then sent me a complete new set of brackets to make up for it. I still havne't swapped out my bracket on the left side so my shackle angle is different on one side than the other and thus I still have the extra set of brackets.

I'd love to have spare axles no matter what they were (1/2, 3/4, 1 ton, whatever and some spare running engines to put in things like my K30 even if only to move around the yard or temporarily while engines are being rebuilt.

I would love to have some spare winches and brand new 42s laying around for my uses too. /forums/images/graemlins/smile.gif
 
Lol, I forgot, I've got more crap. 3 leaky radiators, two three cores and one two core. One NP 208 for 700R4, dirty but functional. flexplates for 1 and 2 piece RMS, flywheel for 2 piece RMS, four 35" BFG A/Ts nearly bald, no less than three sets of stock sized 16 and 16.5 rim 8 lug tires, batteries, rims, just too much crap. I have a spare set of brand new 1/2-3/4 ton stub shafts and a spare used stub and long side shaft and u joint for a 10 bolt front.

Oh yeah and an extra Echobit flip because I bought one of the prototype lifts and Mike sent me two passenger side brackets, then sent me a complete new set of brackets to make up for it. I still havne't swapped out my bracket on the left side so my shackle angle is different on one side than the other and thus I still have the extra set of brackets.

I'd love to have spare axles no matter what they were (1/2, 3/4, 1 ton, whatever and some spare running engines to put in things like my K30 even if only to move around the yard or temporarily while engines are being rebuilt.
 
454 block, heads and crank.
350 short block and one head
400 trans.
203 transfer
2 x 205 transfer
208 transfer
14 bolt
2 sets disk brake conversions
entire 4" lift kit. All spring
4 x 35x15.5x16.5 sx's
Aluminum Fan shroud with two electrics
Plastic box full of door parts
50 gal. cardboard barrel of wiring from old chevys
Gobs of interior stuff.

Now that I think about all this stuff its time to clean house and throw some stuff away.
 
Well, everything is on my truck that I have to put on it except for my air tank for my onboard air.

I have a lot of stuff hanging around though:
Several air cleaners including a TBI one and a spare 5" element one
BBC Oval port OE intake without EGR
Couple SBC intakes including a TBI one
Countless Quadrajets
4 bolt 350
Couple HEI distributors, two 4 terminal ICM, one ESC
4 or 5 known good alternators including a couple 140 amp ones
Couple starters and one with BBC supports
Couple TH350s in unknown condition
Complete front and rear ten bolts
Complete 3.73 14FF
Spare pair of hubs for 10 bolt
Couple spare 10 bolt carriers
Single 12 bolt carrier with ring and pinion and yoke
Front CV driveshaft to who knows what, doesn't fit my truck
2 or 3 pair of spare 10 bolt front and rear backing plates
1 set of 235x75r15 snow tires on stocker wheels
1 set of 31x10.50r15 Grabber APs on stocker Rally wheels
1 set of 33x12.50r15 Seiberling street tires on 15x10 Rockwell turbines
1 set of 33x12.50r15 Mud Kings on 15x10 Outlaw IIs (happen to be on truck right now)
1 set of 265x75r16 Kelly street tires on 16x7 chrome modulars
Complete front clip off 77 pickup minus hood
Complete set of gold trim from 77 pickup
Complete front quad headlight clip off 84 pickup minus wheelhouses
2 pairs of doors from who knows what
Bunch of boxes of other stuff that I've never thrown out including power steering pumps and the such
Complete 87 2wd pickup except for the steering column
 
[ QUOTE ]
Spare parts I have collected:
3x OE tach instrument clusters

[/ QUOTE ]

i heard that you wanted to give me one of those!? your wife wouldnt mind!!! please!?
 
You must log in or register to reply here.

Latest Posts

Top Bottom