Will this engine meet my needs?

[blackk5350]

http://store.summitracing.com/partdetail.asp?part=NAL-12486041&autoview=sku

i have had y eye on this engine for a while. my 350 is about to poop out so i was loooking into new power, all i would do is get an edelbrock tbi intake and???? you tell me.

would it be a good swap. should i run into any prob's?

 

[dominic]

install a 383 stroker in the there that will solve your problem

 

[michaelgilitiuk]

motor

ya for that money i would get a old tbi motor and make it a 383 and keep the tbi make sure u get a high psi fuel pump.

 

[Fabrimacator21]

What are your needs?

I know theres a few people running those around here. ONly problem I could see is maybe having some tuning issues. You might have to get a chip made to get the full potential out of it. Unless you have a way to burn PROMs.

 

[tRustyK5]

For $300 more you can get this...

http://store.summitracing.com/partdetail.asp?part=MLL-BP3830CT1&autoview=sku

405 hp/440 ft/lbs

Of course it'll be harder to stay with TBI with this engine...

Rene

 

[Wildman III]

See if you can get a hold of jet preformance they can burn you a prom.
You can also install the edlbrock tpi that uses
http://store.summitracing.com/partdetail.asp?autofilter=1∂=EDL-3501&N=700+4294925239+4294839074+4294853151+115&autoview=sku

 

[sweetk30]

dont waste your time with jet.

look at guys like brian www.tbichips.com. he has good links and info. he also has a place he is use to dealing with for motors he can burn chips vary easy for the motors thay build.

 

[Supergas]

Better Deals

There are better deals out there than Summit..

Try Scoggin Dickey or Pace Parts who are direct GMPP dealers.

These guys also offer free freight a lot of times...

If you are looking for down deep power, look at the HT383 or HT383E engines....

Supergas