Windshield wiper problem

[treborjm87]

Anyone have the wiring diagram for the control (off of the turn signal lever) to the main harness? This is for a 1984 K10. Years ago, I tried to add delay wipers to my truck off an 86 C10. I never did get the delay to work. I only have one speed. It's very slow. I have all of the wiring in the truck, (including the delay device) but I think that I may have a wire crossed somewhere.
I found this post, which has a wiring diagram for the older truck with the switch on the dash. http://coloradok5.com/forums/showthread.php?t=311937&highlight=Wiper+wiring but I think I need the newer model wiring diagram.

Thanks!

 

[dyeager535]

Did you look at the wiring to see if it is indeed different?

From what little I recall from having an '83 with dash mounted wipers, and now having column mounted, everything seemed to be pretty much plug and play at the delay module regardless of year. I could be wrong, but I'd check wire colors/positions on each connector if you can find the proper diagram.

I can probably provide a picture/wiper section of the 1991 R/V manual if you still need it, pretty sure I've got them on my other computer somewhere.

 

[treborjm87]

One of my friends bought a Hayes manual the other day. And it seemed that the colors were what I have in my truck. I have removed the delay module and plugged in without it... Still have the same issue. I really think I might have moved the wires in the connector (on the switch harness) a long time ago.

If you have a picture of the wires going into the connector in the order that they belong, I'd be very appreciative of that.

Thanks!

Rob

 

[brian wafer]

that model wiper are from 1978 to 1984. maybe not same wiring.