I am running a wire from my dash down to the trans pan and I am also running a new speedo cable. Think it would be alright to run the wire and the cable through the same hole together? It makes sense to me because they are basically going to the same place. Anything I'm overlooking? Thanks
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Wire routing?
- Thread starter jfaulk
- Start date
Should have no problem running them through the same grommet.
IIRC, the speedo cable grommet is pretty soft, run the wire before putting connectors on the end and it should fit through pretty easily, shouldn't need to make any mods.
IIRC, the speedo cable grommet is pretty soft, run the wire before putting connectors on the end and it should fit through pretty easily, shouldn't need to make any mods.
Just my $0.02 and maybe being overly cautious here: I would run the wire through a different grommet hole if possible, depending on the size of the wire. The speedo cable is fairly rigid. With the movement and vibration, you may have problems down the road.
I personally don't like to share space with electical wires and cables of any type.
I personally don't like to share space with electical wires and cables of any type.
