I just installed my sm465 into an automatic blazer, which wire do i run my reverse wire from the tranny to under the dash. and also the neutral safety switch?
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Wiring ?
- Thread starter slyguy_22
- Start date
anyone?
knew i shouldve posted last night, well i guess im gona go and try n figure it out. hopefully it wont be too much of a pain
Well, the wiring itself is swappable, for the reverse lights. Light green and blue wires, it unplugs somewhere up along the firewall IIRC.
Neutral safety switch for the 465 is activated by the clutch pedal, I would assume for an auto conversion, there are the same yellow and purple wires that need jumped. I'm pretty sure this was posted before.
http://coloradok5.com/forums/showthread.php?t=208538&highlight=transmission+reverse+lights
Neutral safety switch for the 465 is activated by the clutch pedal, I would assume for an auto conversion, there are the same yellow and purple wires that need jumped. I'm pretty sure this was posted before.
http://coloradok5.com/forums/showthread.php?t=208538&highlight=transmission+reverse+lights
