Looking for a rear driveshaft for an '85 M1008.
What do you have?
What do you have?
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
WTB driveshaft
- Thread starter thatK30guy
- Start date
Nobody has one they don't want or need?
It can be off a 3/4 ton with the 400/208 combo, too. Those should fit.
It can be off a 3/4 ton with the 400/208 combo, too. Those should fit.
I have one from an 1983 K20 with 700/208 and another off of a K30 that was supposed to be from 400/208 (IIRC). Slight difference in length and I don't remember which was which. Do you have the u-joint spacing you need handy? One of them was under my 83 K20 with a 400/208 and 14FF combo.
$50 plus the ride, but I can be slow to get something this awkward packed to ship and shipping won't be cheap.
Let me measure the length of tube I have from welded bead to bead so we can see how much difference there is. I'd rather shorten than lengthen.
We have a bent shaft here so its the correct length. That's what I'll be measuring from.
Fwiw, have one from a k5. Would fit the slip yoke, but need a conversion joint at diff. Plus length...
They have both been stored indoors but the longer one needs a new slip yoke. $50 forthe short one and $40 for the long one.
Interested in the shaft that measures 51" bead to bead.
Can you figure shipping to 67439?
Can you figure shipping to 67439?
Fedex Ground is just shy of $50 for shipping.
Kenny shoot me your PayPal. My buddy Brent will get this from you.
I take it he changed his mind?
No. He and I just worked out some trades so now I'm going to pay you for this shaft.
Shoot me your PayPal addy and I'll get the funds to you.
Should be in the last PM, let me know if you didn't get it.
Found it and payment made.
