WTB: Springs, Rims, Gears...

[Z71HULK]

Hey guys I'm looking for some CHEAP parts for my upcoming 3/4ton swap. I am need of some 52" & 56" Chevy springs, 15x10 8-lugs, and would like to have some 4:10 or 4:56 gears for a 10-bolt front and 14bFF rear, but we'll see how the budget goes! I'm in Texas and shipping would probably kill most of the deals on this stuff, so if you're close and you got what I need, let me know!

Thanks,
Dusty

 

[gmc4cw]

what gears are in the axles now? it will make a difference when it comes to the gears you want to put in. if the 14 has 4.10 or numerically down you would need thick 4.56 gears or a new carrier and standard gears.

I forget what the number break is for the front but there is one.

 

[Z71HULK]

what gears are in the axles now? it will make a difference when it comes to the gears you want to put in. if the 14 has 4.10 or numerically down you would need thick 4.56 gears or a new carrier and standard gears.

I forget what the number break is for the front but there is one.

Haven't looked at them that close but they are supposed to be 3:73s. Thanks alot for the tip though, I appreciate it!

-Dusty

 

[bigred81]

I have a set of 4.56 gears and open carrier for a 14 bolt FF. I also have a complete 10 bolt front axle with 4.10 gears and a semi float 14 bolt rear axle with 4.10 gears. Where in tx are you because I am in tx just south of San Antonio.

bigred81

 

[fendereff]

i have some 16x10 8 lug rims in Texas....

 

[1979jimmy350]

i have somw 4.1- gears for the 14 bolt

 

[Z71HULK]

PMs Sent!

 

[greywolf]

1 have 10/14sf with 410s,i also have brand new carrier/410 gears and install kit for 14ff ,52"springs of a 74 2wd in wylie tx