4x4k20
1/2 ton status
i just got a set what are the 3/8 bolts used for?? i know where the spring bolts go. ???
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
zero rates??
- Thread starter 4x4k20
- Start date
to offset the axle forward or back 1" or 1.5"
josh86k10
1/2 ton status
You use the bolts if you are moving the axle forward/backward in addition to the 1" lift. If this is the case, the center pin will be cut-off short and the bolt will be used to go through the rest of the leaves. If not moving the axle, the center pin just goes straight all of the way through.
Here's a cartoon I made a while back to describe this. Hope it helps/makes sense. Where it got cut-off by the CK5 logo just says that the green line is the shortened center pin.
Here's a cartoon I made a while back to describe this. Hope it helps/makes sense. Where it got cut-off by the CK5 logo just says that the green line is the shortened center pin.
4x4k20
1/2 ton status
ok thanks i had no ideal. now i see 
