v6toy4x
Registered Member
I had this built early 90s by a local machine shop so it is not the latest in short compact design by any menas but it does work. It was in a v6 toyota for about 6 years then I rolled the toyota. It has been in the shed ever since.
It is an 1-1/2" thick plate on the back of the 203 with the stock TH400/205 adapter bolted to it. The main shaft was shortened splined (32) and heat treated by dutchman when they were still in Portland.
Selling together for $450 or
TH400 205 with factory adapter 32 spline fixed rear output 10 spline front $300
10 spline 203 reduction box with adapter and input $150
Union City CA 94587
It is an 1-1/2" thick plate on the back of the 203 with the stock TH400/205 adapter bolted to it. The main shaft was shortened splined (32) and heat treated by dutchman when they were still in Portland.
Selling together for $450 or
TH400 205 with factory adapter 32 spline fixed rear output 10 spline front $300
10 spline 203 reduction box with adapter and input $150
Union City CA 94587
