12 inch lift crossover doubler gears diy4x

[sinner7773]

moving forces me to sell off tons of my stuff so here goes the list

dual shock kits front and back w/12 lift shocks 100.00
2 rancho dual steering stabilizers 100.00
np205 with new rebuild kit and th400 short shaft for doubler 300.00
diy4x 44 diff cover 50.00
offroad designs crossover steering rod (used) with drop pitmanarm 100.00
tapped top cap for crossover 15.00
44 drop steering arm draglink (used)15.00
44 3" steering block 15.00
4 3/4 ton disc cross drilled with ceramic pads 100.00
4 3/4 ton brake calipers 50.00
home made shackle flip kit 30.00

and maybe more all items are new unless stated if you have any questions email me [email protected] they are located at fort riley kansas and if you would come get it i also have a 14bolt ff swr and a dana 44 will ship at your cost prefer pick up shoot me a offer on any of it or take it all for 2000.00 my loss just need it gone i do accept paypal to plus 4% just let me know about any questions thanks again

 

[thatK30guy]

Are you still in Ft. Riley? I'm coming up to Manhattan on this coming Wednesday.

 

[80 Chevy K20 4x4]

Do you have the passenger side steering arm for a flat top knuckle for crossover steering?

Let me know.

Thanks.

 

[sinner7773]

that k30 guy i am in south korea right now but my wife is available to show you everything andsell just send me a pm and we can work something out let me know

 

[sinner7773]

silverado k5 i do know i have soldthat off with my last rig sorry

 

[BLUIDVL]

Interested in the DIY shackle flip.

Are the ORD brake lines extended?

 

[sinner7773]

bluidvl the the brake lines are extended for a 12 inchlift let me know

 

[BLUIDVL]

bluidvl the the brake lines are extended for a 12 inchlift let me know

Ok great, wondering though will they work on a D60 front end & are they the banjo style. If so will take them.

Im up in Canada but have a friend with a PO box in Washinton. Ill figure out the specifics and will email you tomorrow with the details.

Is the doubler from NorthWestFabworks?

 

[sinner7773]

yes they r the banjo bolt with new bolts and washers yes the doubler is northwest fab works never installed so all gaskets are still new and it is light so shipping wont kill

 

[BLUIDVL]

Ok couple of other things im after

rear disk mounts, are they for a 14B FF?
ORD rear disk brake line, will these work with the El dorado calipers?
14 bolt rear dif cover
Diy4x fush kit
offroad designs weld in brace
offroad designs bolt in brace


Will email you tomorrow.

thanks

 

[sinner7773]

front upper shackle hanger dont know if he still makes them i know ord does
rear disk mounts are for a 14b ff
the rear disk lines should work with them i belive they were banjo bolt calipers to

 

[thatK30guy]

Just to clarify, you want $2000.00 for the whole list in post number 1?

If so, I'm leaning towards the positive side of paying your wife twenty $100.00 bills on Wednesday.

 

[sinner7773]

yes thatk30guy 2 grand and it is all yours just email me or pm me and i will send my wifes name and number what time would you be around soshe can take off work
thanks again nothing will sell tell wed since thatk30guy responded first will notifiy after that if anything is left also if you have time i got a 500cid caddy and a 4 speed and such at the house if you interested

 

[supermotard750]

wow!!! so much stuff, what are the splines on the NWF doubler? i could use the 14bolt spring perches and u bolts, you don't have the top plates do you??

 

[sinner7773]

supermotard750 31 spline th400 i do have the diy4x top plates for them to but all sales are on hold till wednesday if i have it all on thursday i will let you all know the goal is it all gone fast so we will see

 

[wheeler]

Wow

If sweetk30 doesn't buy the load, I'll take the bolt in and weld in steering brace, and the wheel spacers, and the poly bushing kit.

 

[sweetk30]

If sweetk30 doesn't buy the load, I'll take the bolt in and weld in steering brace, and the wheel spacers, and the poly bushing kit.

i dont want any of it .

 

[wheeler]

Sweet, I'll be sending you a pm now sinner.

 

[xenomarine]

Hey, I'm interested in this stuff: I'll take whatever hasn't been sold yet
offroad designs brakeline kit 50.00
diy4x rear disc mounts 25.00
diy4x 14 bolt perches
diy4x u bolts 14 bolt
offroad designs bolt in brace

 

[wheeler]

If sweetk30 doesn't buy the load, I'll take the bolt in and weld in steering brace, and the wheel spacers, and the poly bushing kit.

Oops I meant thatk30guy... Sry