1986 Blazer parts truck

[CaveBlazin]

Im selling my blazer, its a 1986 with a van width 14ff, 3/4 8lug front with 4.11's, 35x12.50x16.5, rear disc brakes, SM465/NP208, 6' front springs and custom shackle flip rear with 1' axle perches totaling 7' lift in the rear. It needs an engine but if I sell it for the asking price you get the 383 stroker crank,rods,.030 pistons, 4x4 cam, reconditioned heads with new springs/seals and it was pocket ported. I have an edelbrock performer intake with a edelbrock 650 performer carb. I have the stuff for working A/C as well.

 

[bigjimmy82]

pictures please, does it have a title?

 

[Metrodps]

Yes pics. Does it have cruise control, power windows, locks? What color of interior and is it a silverado?

 

[RGV72BLAZER]

So the asking price is 700 with the 383?

 

[CaveBlazin]

Sorry for the delay Im never around my puter. It does have a good title, the interior is black with a brown dash with a couple cracks on it. The drivers side floor panel has a hole in it but I have the metal to replace the hole, just needs a welding. The seats are grey but not your normal chevy seats and the bench seat in the back is tan. Its not power inside and it does not have cruise control. I dont think they made cruise for the manual trannys back then but i may be wrong. If I can get close to 700 i will throw all the parts needed to build a 383 minus the block(its toasted) all the rotating assembly is pratically new estimated 5mi or 3hrs. The block was stored improperly and it cracked but all the internals were untouched. Please email me any questions i can check that at my work. Thanks again
Spence