Parting Out 1991 Chevy K5 Blazer - Parting Out

[number_juan]

If the hood ornament is still available?

 

[CUCV2]

If the hood ornament is still available?

yes

 

[number_juan]

Price shipped to 78577

 

[CUCV2]

Price shipped to 78577

$40 shipped

 

[JoshHefnerX]

How much for the electrical connector on the tailgate keyswitch. Funky round connector. Cant find a source for those.

 

[CUCV2]

Is that in the tailgate? Or the switch on the dash. I sold the entire tailgate last weekend.

 

[JoshHefnerX]

One I wanted was in the tailgate. I guess I should have spoken up earlier.

Thanks

 

[CUCV2]

One I wanted was in the tailgate. I guess I should have spoken up earlier.

Thanks

That is something I would have preferred to keep together anyways. Thanks for the interest and sorry I missed your comment earlier.

 

[metalneverdies]

Pm me price shipped for the door pull strap covers?

I also would be interested in the air vents from middle of truck over to all the drivers side stuff.

Also interested in steel plate and plastic lower column cover.

 

[dabomb6608]

Is the sending unit available? With functioning fuel gauge sender? I don't need the pump. Assuming it still has the stock one in it and not one without the pump. Shipping would be to 62922.

 

[CUCV2]

Pm me price shipped for the door pull strap covers?

I also would be interested in the air vents from middle of truck over to all the drivers side stuff.

Also interested in steel plate and plastic lower column cover.

Pull strap covers are MIA. They are available through LMC though. Air vents are available as well as the plastic lower column cover. $20+ shipping.

 

[CUCV2]

Is the sending unit available? With functioning fuel gauge sender? I don't need the pump. Assuming it still has the stock one in it and not one without the pump. Shipping would be to 62922.

Is the sending unit available? With functioning fuel gauge sender? I don't need the pump. Assuming it still has the stock one in it and not one without the pump. Shipping would be to 62922.

The fuel guage works but the fuel tank and fuel pump were replaced with new units for an S10 and put where the passenger seat used to reside. Not sure if this could help you or not.

 

[metalneverdies]

Pull strap covers are MIA. They are available through LMC though. Air vents are available as well as the plastic lower column cover. $20+ shipping.

I found the vents locally.

Just need the lower column cover now.

 

[Rooster53]

If u have both Blue front bucket seat brackets with sliders i would be interested. Shipping to 06516
Thanks
Rooster

 

[CUCV2]

If u have both Blue front bucket seat brackets with sliders i would be interested. Shipping to 06516
Thanks
Rooster

They are still here and in good shape. They even have Wet Okole Neoprene seat covers. I can deliver the seats to CT for $150.

 

[mudman83]

Do you have the frame brackets for the motor mounts? As long as they are not rusted too much...

Thanks

 

[coal]

Aluminum piece in the center of tailgate available? If so, price shipped to 25309?

 

[CUCV2]

Do you have the frame brackets for the motor mounts? As long as they are not rusted too much...

Thanks

These are spoken for.

Aluminum piece in the center of tailgate available? If so, price shipped to 25309?

Not sure what you mean? The handle?

 

[coal]

Bought a 1991 Chevy K5 Blazer for the plow. It is pretty rusty but does run. Transmission has no reverse. Transfer case seems to work well. Let me know what you need or take the whole thing for $500.

View attachment 194525

View attachment 194526

Last picture. Trim piece with CHEVROLET

 

[CUCV2]

Last picture. Trim piece with CHEVROLET

Ok, yeah, that sold. It is getting pretty bare for parts. Thinking about bringing it to the scrapyard soon.