will it work on a 32 spine 465?it had a 208 on it previously so all id have to do is redrill the face for the 208 adapter right?
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
203 range box from behind a th400
- Thread starter twoslo4five0
- Start date
i know the spline count/size is good.
yes redrill is required. and extra hole that go threw install bolt with lots of red locktite and let dry and if need be cut off heads.
and as far as length of shaft to the 203 requirements needed i cant tell ya.
yes redrill is required. and extra hole that go threw install bolt with lots of red locktite and let dry and if need be cut off heads.
and as far as length of shaft to the 203 requirements needed i cant tell ya.
