203 TO 241 doubler?

[twoslo4five0]

anyone have opinions of what i posted up earlier in the thread?

 

[BGKYK5]

you could put the 203 in the rear and the 241 cut in half in the front

But then you'd have to use the back half of the 203...

...

 

[Hossbaby50]

anyone have opinions of what i posted up earlier in the thread?

Nobody makes an adapter to do that. You can't twin stick a 203, and you can't SYE (to make it short) a 203 therefore you end up with a really long dual tcase setups. If you wanted a case setup that long you might as well do a 203/205 divorced doubler or a 241 divorced doubler with a 205 in the back instead of the 203. The 203 is a heavy pig so wanting to leave the whole case in your rig isn't the best idea.

 

[pauly383]

Why not beat the hell out of the 241 with the 4.88's and 700r4 until you can afford a one piece aluminum gear driven case , or a doubler ?

 

[twoslo4five0]

i meant with what im trying to do.208/205.imma do it and see what happens but i havnt heard any input from anyone saying it wont

refer to this thread with pics

http://coloradok5.com/forums/showthread.php?t=249698&page=4

 

[Hossbaby50]

A 208/205 is doable in the same manner a 241/205 is doable. I am probably going to be running a 208/205 in my buggy in the future (hopefully the next 6-9months). A buddy of mine is a machinist and is going to take the 2.61:1 planetary from a 208 and build a crawl box out of it for myself and him to run in front of a 205. Basically a similar thing to a "black box" or "klune V" without the $1600 price tag.

Should be fun to have 5.2:1 lowrange with a 500 CID Caddy.

Harley

 

[twoslo4five0]

but imma do it with no adapter of shaft inbetween the 2 cases