73redblaze
1/2 ton status
Will a np208 driveline bolt up to a 203? Fronts that is
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
208 driveline on a 203
- Thread starter 73redblaze
- Start date
stock flat flange will bolt up . but length is going to be possible problem. every combo is diffrent .
No, the 203 uses a Yoke on the front and the NP208 uses a flange.
73redblaze
1/2 ton status
Looks like it fits
How can it fit since the 203's use a Yoke and the 208's use a flange?
AFAIK ALL 203's used Yokes and never a flange and vise versa about the 208's.
Early 203's had a yoke, my 73 had it, but the later 203's used a flange, I had 2 79's with the flange. The early 203 that had a yoke was also a cast iron rear extension housing that didn't interchange with aluminum versions.
73redblaze
1/2 ton status
This 203 has a flange.
