2wd 700r4 into 4wd

[3car]

i have a good 700r4 out of a 2wd suburban,what is required to swap the output shaft to bolt up my np205?should i just sell it and get a 4x4 trans?

 

[pcorssmit]

You have to tear down the whole tranny. The output shaft is the last thing to come out.

Pete

'83 K5, 350 TBI (ex 6.2), 700R4, NP208, Dana 60/14 bolt, 4.56s, Detroits, 3" lift, 15-39.5x15 TSLs
'97 Dodge 2500 4x4 CC LB Sport, Cummins 5 spd

 

[HarryH3]

Yep, you have to gut the whole tranny, swap the output shaft and then put it back together. The 2WD tail housing obviously gets tossed.

<font color=black>HarryH3 - '75 K5</font color=black>
<a target="_blank" href=http://www.angelfire.com/super/ThunderTruck>www.angelfire.com/super/ThunderTruck</a>
It's a great day to be alive...

 

[3car]

thanks.sounds like a job etter left to someone else.

 

[HarryH3]

Yeah, it's most definitely not a job that a first timer should tackle!

<font color=black>HarryH3 - '75 K5</font color=black>
<a target="_blank" href=http://www.angelfire.com/super/ThunderTruck>www.angelfire.com/super/ThunderTruck</a>
It's a great day to be alive...

 

[Pure Insanity]

It would be perfect for a divorced 205 tho.

If ya can't stop.......Smile as you go under!

PIC of mine from flblazers site<a target="_blank" href=http://www.flblazer.alloffroad.com/photo3.html>
GO</a>