39.5x15-15 TSLs in MI/WI

[CyberSniper]

These were sold a long time ago.













$750 or best or trade for some Ford/Chevy or maybe YJ parts. The price goes down fast if you've got something I want.

I live in the western Upper Peninsula of Michigan but will be making the trek down to mid-Michigan (Flint/Lansing area) at Thanksgiving.


The baldest one is 19/32nds. The two with the most tread have 21/32nds. They're all marked with the location I ran them. They're all measured between the center lugs. The one in the picture where I measured it is right where my thumb is.

My pastey-white hand trying to show the bald tire's tread depth:

 

[thebigdaddyof2]

Interested.

Send me a PM with the list of items you are looking for.

todd

 

[CyberSniper]

Smooth bottom Dana 70 (Dana 70U) with the proper pinion offset (.625") and 35 spline shafts. Basically, I need the BOM so I can look it up on Spicer's site. And a real locker for it.

4.10 geared Detroit/Open 14FF... or with 5.13s... or with disc brakes (goal is either a detroit or welded 14FF with 5.13s and disc brakes).

SYE for a 241, preferably a super short

Married Ford 205

Full case locker for a 35 spline 60

1350 or 1410 U-bolt yoke for a 60

10,500lb or heavier hydraulic winch... needs to be power in/out

LS1 (haha)

44s (not axles)... or bigger

16.5x10 or wider 8 lug steel wheels... or beadlocks with ~4" of backspacing

GM 3/4 ton or 1 ton 56" rear springs in really good shape or 4" lift ones

31x10.50r15 all terrains

33x12.50r15 all terrains

15x8 4" BS chevy 6 on 5.5" aluminum wheels

Full manual doors for a 80-91 chevy fullsize

4.3L V6 roller motor, complete

 

[thebigdaddyof2]

Sent PM.

 

[ProJunkRacing]

Full manual doors for a 80-91 chevy fullsize
i got some what else would you need very little rust and they are white