liv24wheel
Registered Member
that is a sick idea!!!!!!! You will have to post pics of that!
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
52" vs 56" front
- Thread starter tree_entz
- Start date
ive got lifted 64s on mine and i absolutely love them. they flex like mad, and i moved the front hanger so that it only moved the axle back 2". i will eventually put lifted 56's up front as well when time allows.
liv24wheel
Registered Member
how did you move the front bracket forward more than an inch or two? Mine ran right into the body mount bracket.
i cut them off and rotated them forward a little bit in addition to moving the whole bracket forward. hopefully these pics help explain it ( a pic is worth 1000 words 
) you can see the holes from where the rivets were holding the the hanger when in the stock location
) you can see the holes from where the rivets were holding the the hanger when in the stock location
liv24wheel
Registered Member
Yeah ok that makes sense. So you actually modified that bracket and then re-welded them back on. I am thinking I am going to have to move the tank since I did could not get the front bracket to move forward as much. Oh well each mod creates the need for more and more mods. Thats part of the hobby I guess.
Do you have any flexing out pics?
Do you have any flexing out pics?
unfortunately when i flexed it out, i didnt bring the camera...typical. but they were so soft thati was able to fully flex the 64's out before my 8" BDS front springs moved the sightest bit. ill get pics soon
sorry to hi-jack 52-56 front springs thread
sorry to hi-jack 52-56 front springs thread
