motojeff16
Registered Member
I have a 6.2 diesel engine and a 700R4 and a NP 208 and a NP 241 transfer case I am wanting to trade some thing for a 14 Bolt FF axle and a Dana 60 front axle with a passenger drop
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
TN 6.2 diesel engine and more
- Thread starter motojeff16
- Start date
Prices?
Condition?
Input spline count on the transfer cases?
I see that the engine is a 1982 C-code (1/2-ton) engine, but the intake has been swapped to J-code (3/4-ton & 1-ton). What is the story on the engine and the truck?
Condition?
Input spline count on the transfer cases?
I see that the engine is a 1982 C-code (1/2-ton) engine, but the intake has been swapped to J-code (3/4-ton & 1-ton). What is the story on the engine and the truck?
motojeff16
Registered Member
I would rather trade for some axles. but price is around 1000 for all things. I don't know about the spline count on the transfer case it came out of a 82 K5 4x4. I have no clue about the milage. the engine ran but burns a little oil when running. the transmission runs and drives but the front pump seal is blown. the transfercase work from the last time I used it
What year is the NP241, and what transmission was it coupled to?
Good luck with the sale. In my area that drivetrain would bring $500 or less. You might find someone willing to swap, though.
Good luck with the sale. In my area that drivetrain would bring $500 or less. You might find someone willing to swap, though.
