What's new
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.

'72 Bluggy: Rocks/ 47s/ LoMax

so finally i end today's pics with ones of the rough country add a leafs and www.greatlakeoffroad.com diff covers. the front 60 has 1/2" plate for a hydro ram tab and higher drain plugs, the 70 cover has the higher drain plug as well. these things look damn beefy at 1/4". so post up guys, let me know what you have to blurt out since i've been posting pics for the past 2 hours :haha:

840A0141.JPG

840A0142.JPG

840A0143.JPG

840A0144.JPG
 
Pictures looks great - you guys sure made putting that tub back on look hard :D :p:

mad props for getting it done - your Blazer is sweet!

One question though - is your tub bent? it looks like the "bed" portion is not perpendicular to your firewall.
 
OK, did you guys just get up to "ramming speed" with the frame & just jam it in under there? :bow: Holy crap! :eek1: I might have suggested smaller tires, get it down low to the ground. :pimp:

Me no likey the silver. :rolleyes: I'm a "no-show all-go" kinda guy myself though. OK, maybe a little show, but you have to make up for it with go. :wink1:

Is the rear tire going to be that far back in the wheelwell? Going back to my previous point, that looks terrible! :confused: :hack:
Wait a minute, I'm not making any sense. :haha: But seriously, is the body off-center or the axle?

Other than that, looks great!! It'll come. It'll come.

All we need is a little patience, yeeeaaahhh.
Just a little patience, yeeaaahhhh.
Bringing back the GnR memories, :saweet:
Buddy
 
IGOR said:
Pictures looks great - you guys sure made putting that tub back on look hard :D :p:

mad props for getting it done - your Blazer is sweet!

One question though - is your tub bent? it looks like the "bed" portion is not perpendicular to your firewall.
Click to expand...
which pic are you talking about the tub being bent? if it's one of the ones before being put into the driveway, it looks like that because we had to put two 2x4s on each each to allow the tires to spin...fender/tire contact. and it was actually harder than the pictures make it look :doah:



BUDDY said:
OK, did you guys just get up to "ramming speed" with the frame & just jam it in under there? :bow: Holy crap! :eek1: I might have suggested smaller tires, get it down low to the ground. :pimp:

Me no likey the silver. :rolleyes: I'm a "no-show all-go" kinda guy myself though. OK, maybe a little show, but you have to make up for it with go. :wink1:

Is the rear tire going to be that far back in the wheelwell? Going back to my previous point, that looks terrible! :confused: :hack:
Wait a minute, I'm not making any sense. :haha: But seriously, is the body off-center or the axle?

Other than that, looks great!! It'll come. It'll come.

All we need is a little patience, yeeeaaahhh.
Just a little patience, yeeaaahhhh.
Bringing back the GnR memories, :saweet:
Buddy
Click to expand...
i had a feeling someone was going to comment on the ramming speed thing. :haha: the tire will be that far back in the wheel well. need to extend my wheelbase, so that was my only option. dovetailing should solve most of that. axle is off center.



thanks guys. :D
 
You must log in or register to reply here.

Latest Posts

Top Bottom