Thank you
Here's my half top
WIN_20160907_12_14_41_Pro by https://www.flickr.com/photos/97391199@N06CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
72 Jimmy PO has me PO'd
- Thread starter jaros44sr
- Start date
Thank you
Here's my half top
WIN_20160907_12_14_41_Pro by https://www.flickr.com/photos/97391199@N06Here's what I do when not working on the truck, catch and release
IMG_20140218_104512_204 by https://www.flickr.com/photos/97391199@N06
IMG_20140218_104512_204 by https://www.flickr.com/photos/97391199@N06
16614340883571183259663605893842 by James Jaros, on FlickrLower support piece is missing from aftermarket B post panel, have fabricate with pie cuts
16676596374944128832282892444689 by James Jaros, on FlickrNow I have to build the flange with the square nuts
Coming along nicely!
16682636425432629166585744696111 by https://www.flickr.com/photos/97391199@N06Need to figure out angle of return, deburr now
Seems to be15 degrees
Magnets and clecoes are my friend
Last edited:
16683007974214361982160345531465 by https://www.flickr.com/photos/97391199@N06What blue paint stick and red Dycum looks like
16685266466835639360976472505975 by https://www.flickr.com/photos/97391199@N06Just have to cleco together, and figure out where the square nuts get welded on
Right now it is just held together with Magnets
16687973206811635058663302298885 byWhen you can’t weld, bolt it
Now I can use 3M dum dum between the flange and lower B post patch
Last edited:
