CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
74’ Cheyenne C10/K30
- Thread starter HINZ28
- Start date
Picked up the 1974 Cheyenne/10 C10 last night. Truck is 1 owner and super complete. It’s a little crusty and rusty but I needed a driver quality beater
Will be swapping this body onto this K30 frame
The 74
K30. This was originally a K30 tow truck that @Chinahands back halfed, 63” rear springs, 52” front springs added with b-52 kit. Welded Dana 60, 1150 AAM rear, G80 and disc. PSC hydro assist setup. Should be a fun rig when done.
Will be swapping this body onto this K30 frame
The 74
K30. This was originally a K30 tow truck that @Chinahands back halfed, 63” rear springs, 52” front springs added with b-52 kit. Welded Dana 60, 1150 AAM rear, G80 and disc. PSC hydro assist setup. Should be a fun rig when done.
Last edited:
Sub’d
In as long as you don’t get rid of the orange one.
That is badass
Thanks to @Chinahands we got quite a bit accomplished today!
Taking the body off the 74
Body off K30
Concern was the 2wd trans tunnel. Just about cut it out. Decided against and everything fit like a glove. Added 1” hockey pucks as body lift and with the k30 having a taller frame the driveline sits down a little lower. Got lucky
Also had to convert the truck to hydraulic 4 speed. Swapped the the pedal assembly from k30
Truck is also running hydro-boost setup and hydro assist steering
Taking the body off the 74
Body off K30
Concern was the 2wd trans tunnel. Just about cut it out. Decided against and everything fit like a glove. Added 1” hockey pucks as body lift and with the k30 having a taller frame the driveline sits down a little lower. Got lucky
Also had to convert the truck to hydraulic 4 speed. Swapped the the pedal assembly from k30
Truck is also running hydro-boost setup and hydro assist steering
i have a th400/203-205 clocked 2"up under my 2wd floor pan no body lift .
it sure is nice to have a good doner body to swap . i have done a lot like this .
doing the hydro clutch swap my self . removed auto pedal tonight . install hydro in the am .
it sure is nice to have a good doner body to swap . i have done a lot like this .
doing the hydro clutch swap my self . removed auto pedal tonight . install hydro in the am .
Love that color combo.
Martin
Martin
Subscribed
You’re a lot better at that than I am......
Martin
Martin
Tyler actually made that cut. How much did you take off the rear of yours?
Damn.
