Looks really good, on my short list now that I banged the crap out of mine
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
78 sub build (sub is gone)
- Thread starter mnstrburbon
- Start date
When you going to get out to the Bash so that I'm not the only Burb there 
Next year I'm hoping to make it it should maybe be trail ready by then but is it ever done.
I have had a Dana 60 in the garage now for 3 month's that i have not even touched yet. It is all cleaned and painted just need to rebuild the seals,brak's, bearing's, and u joints.
I have had a Dana 60 in the garage now for 3 month's that i have not even touched yet. It is all cleaned and painted just need to rebuild the seals,brak's, bearing's, and u joints.
Sliders like that are on my to-do list... right after I steal a welder. 
Lookin' good.
Lookin' good.
COCHEV
1/2 ton status
Very nice work! question- are you going to re-creat the ridge in the sheetmetal along the bottom there so you can re-attach the weatherstripping? If so i'd like to see pics of that. keep up the good work, your rig looks awesome!
Nope on the weather strip i think if it bothers me i will add a door sweep from home depot later. A rubber flap an inch or so long and attach it to the door bottom so it would seal on the slider.
But i had to trim the bottom 1 inch off the door so it is level with the big part of the door. I m not really worried about noise or water getting in if it does it will just go right back out.
Thanks again for the compliments.
Placed an order today so hopefully i will have some parts by Fri and ill post the pic's.
Lighting and the electrical work is next on the list of things to get done along with painting the sliders. I got some spray grip tape like paint the other day so the plan is to paint that on top of the slider in the door areas for traction. I also got the first blue top optima and it fits nice in the new box.
Placed an order today so hopefully i will have some parts by Fri and ill post the pic's.
Lighting and the electrical work is next on the list of things to get done along with painting the sliders. I got some spray grip tape like paint the other day so the plan is to paint that on top of the slider in the door areas for traction. I also got the first blue top optima and it fits nice in the new box.
Well got some parts in the head light's are wrong but here are some pics
Summit heater and vent kit, carbon fiber tach, blue top audessy battery,8* degree shims,diy hydro cap,led dome light's,tie down anchor points,vision x led rock lights,12 " round X 6" tall k&n filter and outer wear,Hid head light conversion and new head lights. I thinks that all for now.
Outerwear
summit Heater 2800 btu
Vent kit
Vision x tantrum led rock light's
Led dome light they push for on and off so they can be used as cargo or map light's also.
DIY new hydro cap and wrench to hold it while putting fittings on.
L track tie down system i got 10 of the mounts so i can put them all over the bed.
Hid head lights
Shims 8*
Battery and holder
Tach 3 3/8
Air filter, soda can next to it for size comparison.
Summit heater and vent kit, carbon fiber tach, blue top audessy battery,8* degree shims,diy hydro cap,led dome light's,tie down anchor points,vision x led rock lights,12 " round X 6" tall k&n filter and outer wear,Hid head light conversion and new head lights. I thinks that all for now.
Outerwear
summit Heater 2800 btu
Vent kit
Vision x tantrum led rock light's
Led dome light they push for on and off so they can be used as cargo or map light's also.
DIY new hydro cap and wrench to hold it while putting fittings on.
L track tie down system i got 10 of the mounts so i can put them all over the bed.
Hid head lights
Shims 8*
Battery and holder
Tach 3 3/8
Air filter, soda can next to it for size comparison.
bot0611
1/2 ton status
Got any pics of the full steering system??
I like to see!!
I like to see!!
There was some on page 13 & 14 but ill take some front shots for you with everything hooked up.
COCHEV
1/2 ton status
I'll be watching to see how the summit heater works out...
where did you get the cool LED dome lights?
where did you get the cool LED dome lights?
Matt you got those lights from that guy on Pirate?? those seem pretty cool for the price. Looking good!
Ebay 15.00 a piece free shipping
The hid light's are also from ebay 122.00 to my door complete.
Matt, GREAT build man! I don't usually look in this forum, but I just went thru eveny page of your build and I'm very impressed with everything you have done. Great job! I'm still going to steal your double skin idea. Thats awesome.
Got the hid's in today here ar a couple pic's' plug and play i did not like the way the wires where routed for the plugs so i un pluged them and swaped it around so i could use the rubber gromit to seal the new hid bulb.
high beam which is halogen.
low beam hid
high beam which is halogen.
low beam hid
i'll bet those lights work even better during night time hours.
The new hid lights worked awesome on the last dune trip so much light unbelievable. A friend of mine was lost in the dunes about 7 miles from our camp i flashed the hid and he saw them easily and i could see his 5 solteks also so i drove right too him. Three of my friends with the same round headlight setup are going to do the conversion now that they seen these in action.
I was pointed to this thread from my HID question thread... do you have any pictures taken at night?
I'd like to do a conversion on my k10 but want to see if it's worth the $$$.
I'd like to do a conversion on my k10 but want to see if it's worth the $$$.
I don't think i do i keep forgetting to get some, but 2 guys that have seen them have purchased them for there trucks. This weekend 2 more guys seen them and are ordering them up also. I was going to do a light bar and 5 hid's with these it is no longer needed they put out so much light especially in the dunes at glamis, and also on the street. For the price you cant beat it the stock lights suck these are awesome definitely no a waste of money. And the best part they are plug and play in less than an hour cant beat that.
docjake
1/2 ton status
I looked on evilbay and I couldn't find what you have do you have a link to their store or can you point me in the right direction.
