CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.

84 K20 "Ethel" Not an Sbc/NV4500/241C

Semi restoration of a 1984 K20 pickup. 5.3 LS, nv4500, np241c.
all this shittalking without a build thread... @82355 mentioned that you should have one... and it should have pics so quit yacking and start working..
 
and that idiot put your locker in at 4am.. I cannot guarantee it will work.....















for very long..
 
Build thread would be good. I imagine the @bergerking k5 must look like a BK bag...

But no build thread to prove otherwise
 
We got Ethel home in one piece and without to much effort.
image.jpeg
Here she is, burb saves the day towing her out of the yard.
image.jpeg
Going on the flatbed, funny story, the driver "Jake" happens to be a square body guy himself and has a 78 short stepside! So we met a new friend that's local!! Super stoked about that and he took awesome care of her!
image.jpeg
Me and Liam watching him unload her.
image.jpeg
Ready for surgery.. Time to sweat my ass off..
 
image.jpeg Here is pics of the ac compressor mount and where the Evap goes into the cab.

image.jpeg
image.jpeg
The Evap is super hard to see but is located under the center of the dash. It has its own plenum box. I'll have to check but I think it also has its own blower too.
image.jpeg
 
Yes the compressor seems free, I am gonna put a belt on it and bypass the low pressure, after I confirm there is no crazy noise I'll pull it down with my vaccum pump and dump some 134 in it.. Hope it's good
 
Top Bottom