No.
Looks like aftermarket air conditioning add on from the 80's.
Martin
Looks like aftermarket air conditioning add on from the 80's.
Martin
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
84 K20 "Ethel" Not an Sbc/NV4500/241C
- Thread starter sreidmx
- Start date
Semi restoration of a 1984 K20 pickup.
5.3 LS, nv4500, np241c.
Where would I find out how much freon to charge it with..
Vacuum it down first and see if it holds.
Martin
Martin
10-4
Uh.. When did the Trans tunnel become a solid part of the body?? That sucks
Say what?
He is surprised to find that his transmission hump does not bolt in.
It is unnecessary for a clutch swap.
Martin
It is unnecessary for a clutch swap.
Martin
Unnecessary, but mighty handy...
I've done plenty of clutches.
I've never unbolted a floor pan to do so.
Martin
I've never unbolted a floor pan to do so.
Martin
Must be hot as balls
No hotter.. And still haven't started.. Fml.
No hotter.. And still haven't started.. Fml.
Over a 100 here, must be 110+ where you are.
106
Once it hits triple digits it's hard to do anything outside.
charity case
1/2 ton status
Vacation is almost over just get to work!
I don't want to kill myself.. Trying to figure out how I am gonna pull this solo, I have the Trans jack and my normal floor jack.
In the words of Nike, just do it!
You only die once. It's this or adult diapers. Make a decision and move on
Fk u guys.. I found the balance point... Used my floor jack to keep it from spinning then brought her down gently.. 
I don't know what happened..
Somebody please tell me it's supposed to be bent like that.. Wtf Charlie! Dammit.. Clutch crap in my starter too and worked into the teeth on the ring gear. I'll have to clean that out before new starter goes in.
