Depends if we race the Mint!!! 1035 car number. Have you looked at race at the river?
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
84 K20 "Ethel" Not an Sbc/NV4500/241C
- Thread starter sreidmx
- Start date
Semi restoration of a 1984 K20 pickup.
5.3 LS, nv4500, np241c.
I win because 4l80
We haven’t. Kinda all up in the air right now..
I know you are going with a 80 but I found this funny. Those 4l60 guys sure hate those transmissions.
I like mine even having to replace it 5 times lol.
Well.. let’s just never recommend doing this bellhousing mod unless you have a mag drill, or a mill on hand..
One bolt was left hanging on.. the rest where no where to be seen. There was minor dings on the pressure plate but nothing to write home about. Otherwise looks and operates totally normal.. I’d chock that up to pure stupid luck..
and yes this is at our new shop.
One bolt was left hanging on.. the rest where no where to be seen. There was minor dings on the pressure plate but nothing to write home about. Otherwise looks and operates totally normal.. I’d chock that up to pure stupid luck..
and yes this is at our new shop.
Ventilation.....
Throw some bolts in the fubarred holes with red Loctite and cut them off flush. Get a new NV4500 bellhousing and you are good to go again.
Throw some bolts in the fubarred holes with red Loctite and cut them off flush. Get a new NV4500 bellhousing and you are good to go again.
Trading it for a 4l80e and he’s buying the AA bell for it..
One mans trash is another mans treasure.
Somewhere someone is tired of her bullshit.
Tradesies? Lol
Somewhere someone is tired of her bullshit.
Tradesies? Lol
Crapola! Needed a scatter shield! Lol! To bad...all that work and it`s down the road.
Will be nice with the auto though.
Nice shop! More pics of that!?
Will be nice with the auto though.
Nice shop! More pics of that!?
We’re in Irvine and have @jkroberts teaming up with us and he’s full time doin pretty much anything that you can think of, engine swaps, wiring, axles, suspension etc.
engine mods etc is through Roberts Custom Trucks and for suspension stuff Fortify Offroad is who it’ll run through. Both under the same roof.
Lotta bow-tie love in that there shop.
This was also out front 
were linking it in a few weeks also. 
were linking it in a few weeks also.
This was also out front
Nice...
Oh man... that... is... niiiiiiice...This was also out front
Congrats on the new shop!!!
Thank you sir!! We’re stoked!
Hopefully by this time next year you will be shipping me some of your stuff for my customers.
Oh I cannot wait brother!!
Hey! Look at dis!
