1986 Chevy Blazer
92K on the body
Dana 60 Front (4.56)
14BFF Rear (Detriot locker, 4.56)
8" lift, Rancho leaf spring front (new) w/2" shackles from DIY4X
DIY4X Shackle Flip n Switch in the rear w/ 2" cross-tied shackles
Sky Manufacturing Crossover steering and HD steering arm
17x10 Mazzi rims with 37 Iroks
2x6 .250 rocker panels (cut out the bottom of the doors and tied them to the frame with .250 wall 2x2)
2x6 .250 front and rear bumpers with HD D-rings
GM Goodwrench 350, carb, >30K miles on the engine
New jasper 700R4 with >30K on it as well
Custom CV driveshaft with 1350 ujoints
Dropped transfer case to ease the front driveshaft angle
1/2 thick steel pinion guard from DIY4X
interior is herculined and I cut off half the dash pad, tired of getting plastic pieces flying at me while I was rolling down the road. If you want a new dash pad I'll see what I can do about getting one from LMC.
Not all the gauges work and the body has the normal dings and scrapes in it.
Truck runs and drives great, last thing I was going to do to the truck is put a truck avenger carb on it. Carb on it is alright but lacks some punch, needs to be tuned and rejetted at the least.
Looking for 5000-6500$
Truck can be picked up in Woodbridge, VA or if you arrange shipping I can work with that as well. Will trailer it east coast for the price of diesel to get it there.
email me for pics [email protected] or call five4zero 645 8fivefive8
92K on the body
Dana 60 Front (4.56)
14BFF Rear (Detriot locker, 4.56)
8" lift, Rancho leaf spring front (new) w/2" shackles from DIY4X
DIY4X Shackle Flip n Switch in the rear w/ 2" cross-tied shackles
Sky Manufacturing Crossover steering and HD steering arm
17x10 Mazzi rims with 37 Iroks
2x6 .250 rocker panels (cut out the bottom of the doors and tied them to the frame with .250 wall 2x2)
2x6 .250 front and rear bumpers with HD D-rings
GM Goodwrench 350, carb, >30K miles on the engine
New jasper 700R4 with >30K on it as well
Custom CV driveshaft with 1350 ujoints
Dropped transfer case to ease the front driveshaft angle
1/2 thick steel pinion guard from DIY4X
interior is herculined and I cut off half the dash pad, tired of getting plastic pieces flying at me while I was rolling down the road. If you want a new dash pad I'll see what I can do about getting one from LMC.
Not all the gauges work and the body has the normal dings and scrapes in it.
Truck runs and drives great, last thing I was going to do to the truck is put a truck avenger carb on it. Carb on it is alright but lacks some punch, needs to be tuned and rejetted at the least.
Looking for 5000-6500$
Truck can be picked up in Woodbridge, VA or if you arrange shipping I can work with that as well. Will trailer it east coast for the price of diesel to get it there.
email me for pics [email protected] or call five4zero 645 8fivefive8
