KRAZIE87K5
1/2 ton status
For sale or trade for early 90's GM f-body, or notchback mustang... <font color="red"> ROCK BOTTOM PRICE OF $4200! Someone better buy this thing! </font>
I'm looking for a quick sale SO, <font color="red">$4200 for the entire rig</font>, and $1700 (paid $2200 brand new March '03) for the trailer. Add a little for delivery within 300 mi. Entire package for $6000!!! /forums/images/graemlins/1zhelp.gif
Here's all I can think of right now, I'm sure I'll add more later:
*1986 Chevy K5 on 6"+1" lift
*Very clean truck, little to no rust on the body at all
*1991 Chevy 350, with 5000mi on professional rebuild
-runs strong
-includes EFI system which was pulled from the '91 complete with VSS.
*Th400/NP203/NP205 doubler
*1410 Yokes and new driveshafts with .250 wall 3" tube with Spicer ujoints
*Dually Dana 60/70, the 60 has a lockright, 35 spline yukon 4340 stubs and solid spicer ujoints, the 70 is welded. 4.10s. Brakes were recently gone thru this spring when I did the hummer upgrade. I think I can even dig up the SRW front wheel hubs if desired. Drive flanges in the 60.
*Rancho 5012s on all 4 corners, fronts have Ford towers.
*Hummer rims running 42" TSLs with about 50-60% thread remaining. These rims are coated in POR 15. I've got the USA6x6 PVC locks installed. A very slow leak exists in the passenger rear... to the tune of a 10psi loss over 2 weeks time.
*WTO hydro assist (1.75" ram)
*ORD box brace
*Rockstomper crossover steering
*8 point cage, runs thru the dash and hugs the ceiling.
*OBA! York 210 mounted, but still needs install (I've got most the parts already on hand)
*radiator.com 4 core rad.
*mechanical fan & ford electric fan with elec. thermostat sw.
*Large tranny cooler
*ORD: front shackles, 1" body lift and poly body mounts.
*Newer 3" exhaust thru a single factory catalytic (probably could pass emissions, although I've never tried!)
*stainless brake lines
*Borrego rear flips with heavy 6" shackles using 57" ford springs... which need to be replaced.
*Custom bumpers by BIGJ
*Toybox offroad sliders
MUCH MORE! Just give me time to think. pics available. Serious offers only please, and since I'm asking bottom dollar, please try not to low ball me too badly.
Trailer:
*7000# load master with electric brakes
*18' with a 2' dove
*newly installed diamond plate fenders!
*tool box installed on the front of the trailer
*pics available on request
More to come tonight. Thanks for looking.
*edit* of course we need to talk about the trans that needs replacing. I've got a new case for it already, but the hard parts still need to be moved over from the old to the new case. When I was out last time, I cracked the TH400 case on a hill climb.
-Dan
I'm looking for a quick sale SO, <font color="red">$4200 for the entire rig</font>, and $1700 (paid $2200 brand new March '03) for the trailer. Add a little for delivery within 300 mi. Entire package for $6000!!! /forums/images/graemlins/1zhelp.gif
Here's all I can think of right now, I'm sure I'll add more later:
*1986 Chevy K5 on 6"+1" lift
*Very clean truck, little to no rust on the body at all
*1991 Chevy 350, with 5000mi on professional rebuild
-runs strong
-includes EFI system which was pulled from the '91 complete with VSS.
*Th400/NP203/NP205 doubler
*1410 Yokes and new driveshafts with .250 wall 3" tube with Spicer ujoints
*Dually Dana 60/70, the 60 has a lockright, 35 spline yukon 4340 stubs and solid spicer ujoints, the 70 is welded. 4.10s. Brakes were recently gone thru this spring when I did the hummer upgrade. I think I can even dig up the SRW front wheel hubs if desired. Drive flanges in the 60.
*Rancho 5012s on all 4 corners, fronts have Ford towers.
*Hummer rims running 42" TSLs with about 50-60% thread remaining. These rims are coated in POR 15. I've got the USA6x6 PVC locks installed. A very slow leak exists in the passenger rear... to the tune of a 10psi loss over 2 weeks time.
*WTO hydro assist (1.75" ram)
*ORD box brace
*Rockstomper crossover steering
*8 point cage, runs thru the dash and hugs the ceiling.
*OBA! York 210 mounted, but still needs install (I've got most the parts already on hand)
*radiator.com 4 core rad.
*mechanical fan & ford electric fan with elec. thermostat sw.
*Large tranny cooler
*ORD: front shackles, 1" body lift and poly body mounts.
*Newer 3" exhaust thru a single factory catalytic (probably could pass emissions, although I've never tried!)
*stainless brake lines
*Borrego rear flips with heavy 6" shackles using 57" ford springs... which need to be replaced.
*Custom bumpers by BIGJ
*Toybox offroad sliders
MUCH MORE! Just give me time to think. pics available. Serious offers only please, and since I'm asking bottom dollar, please try not to low ball me too badly.
Trailer:
*7000# load master with electric brakes
*18' with a 2' dove
*newly installed diamond plate fenders!
*tool box installed on the front of the trailer
*pics available on request
More to come tonight. Thanks for looking.
*edit* of course we need to talk about the trans that needs replacing. I've got a new case for it already, but the hard parts still need to be moved over from the old to the new case. When I was out last time, I cracked the TH400 case on a hill climb.
-Dan
