CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
91 crew cab project
- Thread starter toodark
- Start date
nope not even close
shaun89
1/2 ton status
ya, the burb has the same wheelbase of a standard cab long bed truck, and the crew cab is a lot more. burbs up to '87 were 129.5" and '88-'91 were 131.5"
total length?? or wheel base??
I can go measure real quick but I'm sure the info is on here somewhere if you use the search button
I can go measure real quick but I'm sure the info is on here somewhere if you use the search button
Truck frame shortened if you want to run a normal 6.5 box
If you want an "ultra short bed" then use a Sub' frame
Theres a crew cab on a sub frame on this board look at the K30 thread
If you want an "ultra short bed" then use a Sub' frame
Theres a crew cab on a sub frame on this board look at the K30 thread
your best bet would be to find a regular crew cab and cut it down
its easier to shorten then it is to extend
its easier to shorten then it is to extend
it shouldn't matter really your gonna change beds out anyways and front hubs are cheap now
no differance
ebay, I got mine awhile back for 250.00 each with new rotors and races and studs
jeez man they went up ALOT
http://cgi.ebay.com/ebaymotors/2-Da...62422488QQrdZ1QQsspagenameZWDVW#ht_500wt_1365
http://cgi.ebay.com/ebaymotors/2-Da...62422488QQrdZ1QQsspagenameZWDVW#ht_500wt_1365
shaun89
1/2 ton status
u can get them from GM, hubs,rotors, and studs all pressed in,both for $318
for a pair???
oops I meant for the pair
