CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
91 K5 Building were p.o. left off
- Thread starter revvin7
- Start date
I never had a problem with it. I'm sure you will, but check all the connections involved with it whenever you get around to it. Maybe something came unhooked?
454Sub
5/8 ton status
Is it possible the mounts are bad and the front output is rubbing on the crossmember. It happened to mine once and I thought it was a bearing in my 205 going out.
That is a good thing to check. When I went from a stock front shaft to a 1350, the CV was so much bigger that is was contacting my crossmember, so I had to clearance it for now until I build my own crossmember. However, I think in this scenario this is not what is going on (unless he was driving home in 4WD, the front output wouldn't be spinning the whole time so even if it was touching, you wouldn't hear anything). Like I said, I will put money on that it's his rear shaft either the yoke pulled too far out of the spline, or his pinion is pointed up in the rear with a normal 2-joint shaft...or probably both.
But, 454Sub has a good point and it should be something you check when you put it all back together.
Last edited:
I replaced the chain and installed the front locker. Noise is still there. I'm just going to deal with it for the time being.
Next month theirs a group of us going to tuttle creek. Pretty excited to see how it does.
Took it out for a little spin yesterday. Still need to make a bumper for the front for the winch.
Next month theirs a group of us going to tuttle creek. Pretty excited to see how it does.
Took it out for a little spin yesterday. Still need to make a bumper for the front for the winch.
Glad you bumped this. I've been wondering about it. I'm excited to hear about how it does with a front locker.
I'm going to say yes, you should
Truck is looking good dude. Take pic's of your wheeling trip
You didn't try to climb anything?
Martin
Martin
What Tuttle Creek are you talking about?
Tuttle Creek ORV park, just South of Randolph. North of Manhattan.
Martin
Martin
When you guys going there next?
I go there all the time. If you are friends with Randolph ORV Park on facebook, their profile picture is a picture of my rig
.4/18 and 4/19
Bump?
Martin
Martin
Did you guys go there for RBSN last november?
Not to my knowledge. We usually just decide a weekend to go with our local group and just go. Not revolving around actual events per se.
