WOOPOW!! 
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
91 Suburban, Family truck build. She done :(
- Thread starter 83ChevyK5Blazer
- Start date
Put its first 50 miles on today.
Going to drive it to wyoming on thursday.
The TBI would work fine on that engine.
Martin
Martin
I still have all the parts and the harness is just coiled up to the side, making it work on this engine is something I've been thinking about.
Will you have to trim for the 38’s or will it make the trip?
It doesn't hit anything in mall crawler mode, so I'll trim later.
Nice, less on the check list.
Where are the snow wheeling pics??
The best I have lol I'm pretty sure this is the first time this truck has ever been in snow over a light dusting.
I spent the last weekend trying to get rid of the death wobble that has started recently. The week before I replaced all the ends on the draglink and tierod. I measured the old tire rod and made it the same length... it made everything worse lol.
Next it still wobbled just not as bad as before. I could get a very small amount of play, prying down on the passenger knuckle with the tire on.
I replaced the bushing and spring with new parts.
She drives so much better now, tracks straight, doesnt get as squirrely at speed. I just need to get the wheel aligned and I'll be happy with it.
Next it still wobbled just not as bad as before. I could get a very small amount of play, prying down on the passenger knuckle with the tire on.
I replaced the bushing and spring with new parts.
She drives so much better now, tracks straight, doesnt get as squirrely at speed. I just need to get the wheel aligned and I'll be happy with it.
Glad you got all of the DW worked out. How's the 454 running? How do the mpg's compare to the old sbc?
I'm going to try and actually keep track of milage on the trip back to Mississippi.
I'm still tensing up at bridges and expansion joints, but no coffee was spilled going to work today lol
I'm still tensing up at bridges and expansion joints, but no coffee was spilled going to work today lol
I finally fixed my winch, so it got put back in, just need a contactor and rope for it.
And ditched the front bench for a set of Cherokee buckets. I will finish out the front with a jump seat from a Silverado when i find one.
And ditched the front bench for a set of Cherokee buckets. I will finish out the front with a jump seat from a Silverado when i find one.
Since we bought the truck I have been missing the tailgate cable on the pass side, we just didn't put much weight on it to avoid tweaking the tailgate.
I got a cable from the parts store, modified the length, then the stock nut broke loose, so i made a new one, and a new bolt. So nice to not worry lol.
I also welded on the stud for the drivers side rear shock, and put a new airfilter on.
I got a cable from the parts store, modified the length, then the stock nut broke loose, so i made a new one, and a new bolt. So nice to not worry lol.
I also welded on the stud for the drivers side rear shock, and put a new airfilter on.
Check the oil and gas ‘er up!
1 qt low and i really don't want to..... it's going to be 'spensive
Bump 
I have a feeling there may have been some changes.
I have a feeling there may have been some changes.
are you stirring the pot? 
are you stirring the pot?
Whaaaaa???
Very slow changes lol
