A sway bar that works with crossover steering!

[Rugby_7]

Have your cake and eat it too!
Crossover steering, soft springs, and a sway bar!
https://www.offroaddesign.com/crossover-steering-sway-bar-kit.html

 

[sweetk30]

on my list for the one truck with 8" BDS springs and crossover and other goody parts .

thanks for the new much needed bolt in quality product

 

[Rugby_7]

on my list for the one truck with 8" BDS springs and crossover and other goody parts .

thanks for the new much needed bolt in quality product

Will be a good setup on that truck for sure!

 

[Capt Ron]

Any future designs for those of us running Dodge 60s in a square?

 

[Hosalabad]

This is hot, but I'd need you guys to make something to weld onto an aftermarket plate, or new plates for swapped axles, like 60s.

 

[Rugby_7]

Any future designs for those of us running Dodge 60s in a square?

The sway bar should work with that axle. We are going to be putting some weld on bungs on the website soon for people that dont have stock GM plates anymore.

 

[Rugby_7]

This is hot, but I'd need you guys to make something to weld onto an aftermarket plate, or new plates for swapped axles, like 60s.

Working on adding that to the site pretty soon here!

 

[sweetk30]

forgot to add i have a original panhard / trac bar kit from a member way back in the day he use to make and sell .

going to be more street TALL BIG truck .

 

[Rugby_7]

Weld on threaded tubes now up!
https://www.offroaddesign.com/catal...thread-1-3-8-od-1-1-2-long-pair/category/380/

 

[sweetk30]

Weld on threaded tubes now up!
https://www.offroaddesign.com/catal...thread-1-3-8-od-1-1-2-long-pair/category/380/

why not just make the thread in pin a weld on pin . ? less stuff i would think to play with .

 

[SpeedlabDan]

I love it! Too bad I just got my sway bar disconnects last week!

 

[sweetk30]

I love it! Too bad I just got my sway bar disconnects last week!

people buy them up used a lot so easy resale when your ready to go the other way

 

[Stephen]

why not just make the thread in pin a weld on pin . ? less stuff i would think to play with .

Not a bad idea but we're trying to keep it a bolt on system as much as possible. And the pins are stainless and we'd like to keep them that way and we didn't consider weldability at all as a material property for this. If you have aftermarket plates you can weld on the threaded bung and be ready connect.

And of course you can customize this stuff various ways. A couple of shock tabs welded to the axle tube will let you connect the bottom of the link if you don't have an easy way to tie to the ubolt plate but do have a way to weld it.

 

[wheel400]

So the old sway bar disconnect kit does not work with cross-over steering?? Or can I keep the kit on the truck...

 

[Hogback Fabrication]

Regardless of whether you're using our disconnects or not, crossover doesn't work with the stock sway bar.

 

[Stephen]

So the old sway bar disconnect kit does not work with cross-over steering?? Or can I keep the kit on the truck...

To answer a different way:
stock swaybar does not work with crossover
disconnect kit for stock swaybar does not work with new swaybar

 

[pomai]

Will this work with your high steer also?

 

[Hogback Fabrication]

Will this work with your high steer also?

Yes it will

 

[pomai]

Yes it will

Steven,
Could I get the bar uncoated? Going to powder coat it Gloss Black.

And just to be sure,
I have Your High Steer, Cross Over System and your 5" Custom Spings.

 

[Rugby_7]

Steven,
Could I get the bar uncoated? Going to powder coat it Gloss Black.

And just to be sure,
I have Your High Steer, Cross Over System and your 5" Custom Spings.

Unfortunatley we don't have an option for them to be uncoated.