aa

[texasorangek5]

i need to find new hubs and rotors that will fit my lockers... i got the rotors in the picture from auto zone and did not realize my lockers would not fit till it came time to put them in.... does any one know where to get new rotors and hubs to fit a k5??

 

[Jason4x4]

what doesn't fit about them?

 

[01maroonz71]

you mean lockouts, not lockers, and it looks to me like the splines (groves between the splines) is deeper/wider on your old ones. maybe it's just the way it looks though.

 

[1-tonmudder]

Look at make sure the outter edge of the hub is not bent.Even a slight bend will keep the lockout from going in.Also you will have to line up the spline in the middle of the lockout before it goes in.

 

[texasorangek5]

you mean lockouts, not lockers, and it looks to me like the splines (groves between the splines) is deeper/wider on your old ones. maybe it's just the way it looks though.

there yea that is the problem but i cant find any hubs with the wide splines any ideas?? and i cant find any lockouts to fit the rotors

 

[01maroonz71]

we need some more info on the hubs, what brand, stock,etc??? and also the axle??? 10bolt??dana 44??? was it in the truck when you bought it???? where is the old hub and what was wrong with that one????