Any Ideas?

[Randybt]

Hi Everyone, Does anyone know where I can find this heater hose? I have searched everywhere I can think of. If I can't find the hose I am happy to eliminate it with a new intake fitting and straight rubber hose, but need to find the fitting. Any ideas? The fitting is fine thread as you can see. On an 1989 K5 5.7 Thank you for the help!

 

[Blue85]

What's wrong with the one you have? If the hardline is OK, you can probably cut the crimp off and attach standard heater hose with a hose clamp. If you don't need hardline, you can probably just delete the adapter coming out of the intake and use a hose thread to barb adapter and run it all with rubber hose. Something like this: https://www.amazon.com/Global-Parts-Distributors-Fitting-8221257/dp/B00YWCOY3Q. Have you tried matching these parts up to brass fittings at the hardware store to identify the thread?

 

[Randybt]

Got it thank you. I was able to get the fitting out of the intake and was able to locate the barb adapter. In business, thank you

 

[JoshHefnerX]

I know you're past this, but I almost wonder if a hydraulic shop could have made one. Interesting.