Anybody recognize my winch bumper?

[dremu]

I'm gonna vote Warn Classic as well. I have a very similar one, onto which some previous owner welded a brushguard.

Mine *doesn't* have a lip on the plate, though it may have been removed along the way. It also had the diamond plate which bolted into the wings, which in my experience was utterly useless -- wasn't strong enough to stand on and rattled like a mofo. I welded new wing covers in

I also welded diamond plate over the center section, as I use the bumper to stand on whilst working on the truck... and being my towrig, it doesn't need a winch so much as the Blazer.

Anyway, with the brushguard, out here you could prolly get $50 to $100 for it, donno 'bout where you are.

-- A

 

[4X4HIGH]

I have a Warn winch mount with brush guards that mounts over the stock bumper and the winch plate is designed so that you can assemble it to mount feet down or feet forward and there is a 90* bend in the plate if you mount the winch feet forward. I know this isn't the whole bumper we're talking about but there isn't a W stamped into this anywhere. I bought this brand new from 4WPW so it's not like i don't know the exact brand of it. Warn no longer makes it either.

 

[udy2554]

Mine was a Warn Classic also. It had the rolled lip, and bolt in diamond plate. Oh...and a cute little Warn sticker on it.

Whoring away!

 

[oldtoyboyd]

I have a Ramsey on my truck and the bolt pattern for the winch is spread out. Not the typical warn pattern. Kinda like the Ramsey pto Mount setup.