Jishory
1/2 ton status
How did you do it?
Last edited:
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Anybody run an 89-91 465/205 with a clocked 205?
- Thread starter Jishory
- Start date
ebay has them listed all the time from one seller. just hit 208 241 in your search.
Jishory
1/2 ton status
so a np208 or np241 clocking ring will work for this?
yunit
1/2 ton status
Going to be tough, you might have to lose that bolt hole above the notch for the shift rails and you will also have to notch the clocking ring. If you can get it to not leak; that will be a miracle.
Jishory
1/2 ton status
changed the subject to something more pertinent...
camiswelding
1/2 ton status
Josh... call steve at off road design,,, he can tell you how... maybe only way is a doubler...
IIRC there was a guy on pirate who has a machine shop in washington state that was making something like this... wagonner machine or something like that... ask over at pirate in the vendor forum or chevy forum
cam
IIRC there was a guy on pirate who has a machine shop in washington state that was making something like this... wagonner machine or something like that... ask over at pirate in the vendor forum or chevy forum
cam
Jishory
1/2 ton status
actualy i already got it figured out... i talked to ord yesterday about it, the 205 would barely be below the frame anyways so im just going to be creative when i make my skidplate, it was dd machine on pirate... he was making them for older style 465/205
thanks for the advice though cam
thanks for the advice though cam
