Anyone make a aftermarket np208 to th400 transfer case brace?

[Bohemian]

i'm after one that goes from bellhousing to transfer case like the stock one

also is the stock brace unique to the np208 - turbo 400 combo or is the same as some other combos?

thanks in advance

 

[SuperAwesomeDOOD]

i'm after one that goes from bellhousing to transfer case like the stock one

also is the stock brace unique to the np208 - turbo 400 combo or is the same as some other combos?

thanks in advance

not sure where you are or which CM you have. I have a tall th400 to np208 pedestal for the flat ‘84 style CM I pulled off my cucv...

 

[Bohemian]

not sure where you are or which CM you have. I have a tall th400 to np208 pedestal for the flat ‘84 style CM I pulled off my cucv...

I'm after the rod that bolts to the two 16mm bolts on the transfer case and to the bellhousing on the turbo 400

 

[centexk5]

Seems like it would be easy enough to make.

 

[6872xtc]

I'm after the rod that bolts to the two 16mm bolts on the transfer case and to the bellhousing on the turbo 400

Have you checked to see if the 700R4 one is the same length? What length would you need?