axle and 8 lug outers

[Bhintz]

parting out my 8 lug 10bolt pm me or post up if you need a part or the outers
and have a 10 bolt 6lug w/ 3.42 gears

 

[ktedesco]

Is your 6 lug 10b for the rear? I know SHAWNSTER is looking for one with 3.42's. He lives in Texas.

 

[Bhintz]

no front sorry

 

[down4thakrown]

What do you mean by outers? I need everything to convert from 6 lug to 8 lug? how much u asking for the set up? Im in phoenix az, 85019

 

[down4thakrown]

Will these work on a d44?

 

[imiceman44]

[ QUOTE ]
Will these work on a d44?

[/ QUOTE ]

Yes outers will work on either D44 or 10bolt front.
/forums/images/graemlins/thumb.gif

 

[K5Chris]

pm sent

 

[Bhintz]

ttt

 

[TxK5Blazer]

I am looking for a set of backing plates how much...Jason

 

[Bhintz]

going to try and sell the whole 8 lug outer assembly

 

[TxK5Blazer]

how much do you want for the whole outer assembly cause all I need to convert my front 10 bolt is the backing plates hubs and rotors....Jason

 

[Bhintz]

160 obo damn thats almost everything you need

 

[85mudblazin]

What else is needed to complete the swap? I dont know anything about this swap so help is appreciated. I wanna swap in the 14 bff but I want everything to be 8 lug.
Thanks /forums/images/graemlins/thumb.gif

 

[Bhintz]

I have evrything you need to make it 8 lug
Backplates
rotor and hub assembly
spindles
spindle nuts and Im throwing bearings, races and seal w/ only a 100 miles on them

 

[K5Chris]

i believe everyting from 79ish and up has the big bearing spindles....... so..... all you need to do the swap is the hub/rotor assemblies and caliper backing plates.... everything else should be the same parts.

 

[TxK5Blazer]

[ QUOTE ]
i believe everyting from 79ish and up has the big bearing spindles....... so..... all you need to do the swap is the hub/rotor assemblies and caliper backing plates.... everything else should be the same parts.

[/ QUOTE ]

for a 10 bolt that is all you need not sure about the dana 44....Jason