This dana 60 came with a front d60 that i bought. It has drums and is full float. Tag says 410s is the plug for and elocker? Any idea what it came out of? Im assuming this would be better than my than my locked semi float 14b
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Axle id help
- Thread starter kbclamper
- Start date
This dana 60 came with a front d60 that i bought. It has drums and is full float. Tag says 410s is the plug for and elocker? Any idea what it came out of? Im assuming this would be better than my than my locked semi float 14b
Dana's have a number stamped in the top of the pass side tube BOM. Dana uses these numbers for part look up. Should be a published list of those numbers with specs
4.10 w/ limited slip. kinda looks like a ford tag, is hard to read. get out a wire brush
4.10 w/ limited slip. kinda looks like a ford tag, is hard to read. get out a wire brush
The plug is likely for a tone ring / speed sensor related to ABS and/or speedo, my bet is Dodge. Is the front 60 a king pin axle?
does 8x6.5 bolt circle fit ?
Holy crap are those drums big.
Ford normally would disc on d60 with abs sensor. If that is what the pig tail really is.
Looks bigger than a 60 from here
Ford normally would disc on d60 with abs sensor. If that is what the pig tail really is.
Looks bigger than a 60 from here
Check the rear face of the passenger side axle tube for a BOM, probably around where you see the brake tube has that little hump between the retainers.
Have you looked at the lower right rear diff webbing for 60 or 70? I agree, that looks big for a 60.
Have you looked at the lower right rear diff webbing for 60 or 70? I agree, that looks big for a 60.
Looks like a dodge 70 rear to me…..I’ll take a pic of mine tomorrow to compare…60 and 70 share the same cover but the housing is slightly Beefier. Agree that the pigtail is likely for a tone wheel
This is your BOM. Looks like first gen dodge.
605509 CHRY 70 REAR 1991-93 1/2 D-200 & D-300 & D-600 & D-700 W/ABS
Dana BOM (Bill Of Material) Numbers - Blue Oval Trucks
Below is a list of various BOM numbers. Ranger BOM’s are listed at the bottom of the page. Also check out our How To Identify Dana Axles page. Complete Bill Of Material information: Bill of Material Number – Manufacturer – … Continued
www.blueovaltrucks.com
Thank you605509 CHRY 70 REAR 1991-93 1/2 D-200 & D-300 & D-600 & D-700 W/ABS
Dana BOM (Bill Of Material) Numbers - Blue Oval Trucks
Below is a list of various BOM numbers. Ranger BOM’s are listed at the bottom of the page. Also check out our How To Identify Dana Axles page. Complete Bill Of Material information: Bill of Material Number – Manufacturer – … Continuedwww.blueovaltrucks.com
Seen the pics… Dodge Dana 70
Been moving the one out of my daughters 01 Cummins for months.
Been moving the one out of my daughters 01 Cummins for months.
