That’s the fit 
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Back In the Saddle Again
- Thread starter K5Devil
- Start date
Now I know why he doesn’t make them for the blazer. What a pain in the ass to get mounted. But it’s mounted 
I don’t think you could have done that with a blazer gate. The hinges would be right in your way plus the torsion springs would be too.
Excellent work. High and tight!
Excellent work. High and tight!
Yeah I had to cut all that off the frame. Came out good I think. I didn’t even think about the torsion springs. You are right it could be done but wouldn’t tuck.
Now I need a better looking gas tank skid plate…. 
Blazer Bash 2023 last minute thrash.
Because no one else has started this thread, where are you at in your prep? https://www.timeanddate.com/countdown/generic?iso=20230908T08&p0=4781&ud=2&font=cursive&csz=1
ck5.com
Blazer Bash 2023 last minute thrash.
Because no one else has started this thread, where are you at in your prep? https://www.timeanddate.com/countdown/generic?iso=20230908T08&p0=4781&ud=2&font=cursive&csz=1
ck5.com
$400 for that isn’t a bad price considering the time it would take for me to build it.Blazer Bash 2023 last minute thrash.
Because no one else has started this thread, where are you at in your prep? https://www.timeanddate.com/countdown/generic?iso=20230908T08&p0=4781&ud=2&font=cursive&csz=1Blazer Bash 2023 last minute thrash.
Because no one else has started this thread, where are you at in your prep? https://www.timeanddate.com/countdown/generic?iso=20230908T08&p0=4781&ud=2&font=cursive&csz=1
I had a set of those bolt style led license plate lights I got from a customer at work. Saved them for this very reason and can’t find them anywhere. Had to order a set. Why do I try to save things? Haha 
you'll find them a week after you get the new ones
Just wanted to see what it looked like semi shined up. Still going to powder coat black. 
Wiring holes drilled in stock location through the bumper brackets. Clean wiring 
So as far as front bumpers go. Which one tucks a winch the best. Engineered vintage/a bomb/etc? Man I wish I had a couple to look at closely in person.
GM Winch Cradle
GM Winch Cradle that supports most 10,000lb winches with a separated solenoid box. The solenoid box will not fit above the winch, and must be located either off to the side of the winch or moved up into the engine bay or wherever you see fit.
cfm.industries
I've ran this one for years, i just added a bit of pipe work for the sides.
I was looking at this one as well. Do you have any install pics?GM Winch Cradle
GM Winch Cradle that supports most 10,000lb winches with a separated solenoid box. The solenoid box will not fit above the winch, and must be located either off to the side of the winch or moved up into the engine bay or wherever you see fit.
I've ran this one for years, i just added a bit of pipe work for the sides.
View attachment 462404
I run the EV BBWM. The clutch lever does hang down a bit, but i have yet to smack it on something.Let me know if you want more pics.
Best Ive got
Decided the fangs need to go up 3”
I just cut mine. Looks better your way but I have no patience or time
Didn’t take that long really few hours. Really best time to do it is before paint
Latest Posts
-
-
-
-
Chevy Dump Bed - PTO from TH400/NP205, Other specs coming in- Latest: 83ChevyK5Blazer
-
