What's new
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.

BB '14 Yard Sale Thread

32 spline SM465 with tall foot 208 adapter. Seems tight and came from a running truck. $200 OBO
 
Last edited by a moderator:
2wd steering box, $40

4 core radiator with top mount plate $40

th400 2wd $150

5 roller 16" 8 lug, make offer, 2 stock steelie wheel, 3 am steel
 
2004 8.1L/496 with a 4x4 4l80e complete with a stand alone wiring harness, throttle pedal, TAC module, re-programmed PCM and a K&N cold air intake. $3000 delivered. 110k miles.

Bought it for my buggy to replace the 355 when I couldn't get it to run properly. Since figured out the issue with the buggy and no longer need the big block.
 
While buying some other stuff from the guy, I took a look at this burb he's parting out. I think he said $75 for each door (as he wont pull the panels) and $100 for the middle seat. Let me tell you, the middle seat is immaculate including the foam, very firm and nice. The cargo side panels looks nice. All molding was good, rear AC and heater, seat belts (rear are perfect, front I'm not sure). Most everything. I'll bring with me to BB is anyone is interested.














 
One of our employees has a matching set of late 70's 3/4 ton axles for sale. 10 bolt front (so no flat top), full float 14 bolt rear, tag says 3.42 gears - $350 for the set/OBO
 
dana 44 in pieces flat top machined and drilled no arms 8 lug rotors and calipers extra axles both sides with new joints in both sets of axles brand new never installed ball joints (raybestos pro grade ) carrier is welded 410 gears ,Solid brand diff cover new in box never installed .
will sell all for 500
if no offers will start selling pieces until gone
make offer will be in moab for bash so i can deliver .
241 t-case 27 spline tight and runs good 225
208 t-case 27 spline builder make offer
front and rear bumpers 87 blazer good condition make offer
reciever hitch 87 blazer 150 make offer
inner fenders 87 blazer surface rust good condition make offer
stock t-case shifter 208/241 out 87 blazer with plastic floor cover 50
ORD sway bar disconnects 75
sackle flip from gatsby truck off brand but lines up and had no problems with them 75
4wd steering box 87 blazer 100 obo
6 inch super lift 01-235-6 front springs and rear blocks add a leaf 250 obo
any stock suspension part let me know i probably have itdana 44 in pieces flat top machined and drilled no arms 8 lug rotors and calipers extra axles both sides with new joints in both sets of axles brand new never installed ball joints (raybestos pro grade ) carrier is welded 410 gears ,Solid brand diff cover new in box never installed .
will sell all for 500
if no offers will start selling pieces until gone
make offer will be in moab for bash so i can deliver .
241 t-case 27 spline tight and runs good 225
208 t-case 27 spline builder make offer
front and rear bumpers 87 blazer good condition make offer
reciever hitch 87 blazer 150 make offer
inner fenders 87 blazer surface rust good condition make offer
stock t-case shifter 208/241 out 87 blazer with bezel 50
ORD sway bar disconnects 75
sackle flip from gatsby truck off brand but lines up and had no problems with them 75
4wd steering box 87 blazer 100 obo
6 inch super lift 01-235-6 front springs and rear blocks add a leaf 250 obo
any stock suspension part let me know i probably have it
can send pics of any parts listed upon request
thanks mike
all parts are OBO
6 degree shims
zero rates

can send pics of any parts listed upon request
thanks mike
all parts are obo
 
Last edited:
Tom Cherry has 3 Sb400 ' s for sale 1500. For all three. But I'm sure he would make someone from here a heck of a deal.
One is built with a tourqey cam and a 4/7 swap with other goodies. Two are virgin blocks.

ResizedImage_1381617243307.jpg

0712141739.jpg
 
I have a TNA engine cross member I slightly modified, cut off the panhard bracket and trimmed a ear off the bottom near the oil pan.

Would like to get $150.

IMG_20140506_175001_zpscf665893.jpg


IMG_20140506_175014_zps4b1db460.jpg


I will flap disk it down and re shoot the primer on it if the buyer wants it.
 
70jimmy said:
I will call dibs on the steering box!!
Click to expand...

Well work gets in the way again. I won't be going to the bash this year. Been holding off till the last minute to see if things were going to change to allow me to go but its just not going to happen.

So on the Steering box, if you can find another buyer do it, if not let me know and I will send you the cash and we can arrange shipping on my dime.

:poo:
 
70jimmy said:
Well work gets in the way again. I won't be going to the bash this year. Been holding off till the last minute to see if things were going to change to allow me to go but its just not going to happen.

So on the Steering box, if you can find another buyer do it, if not let me know and I will send you the cash and we can arrange shipping on my dime.

:poo:
Click to expand...

That sucks. If you want, I could haul it back.
 
You must log in or register to reply here.

Latest Posts

Top Bottom